479886
5
Zoom out
Zoom in
Previous page
1/9
Next page
7.0-C
7.1 - STANDARD CONNECTIONS
ONNECTION FOR TURN SIGNALS ACTIVATION
8.0 - SELECTION OF CONNECTIONS TO ARM/DISARM THE SYSTEM
!
!
!
!
!
CAN-BUS line.
.
.
.
CAN-BUS line.
System arming/disarming and alarm are managed through CAN-BUS line.
(see available
diagrams at web-site www.gemini-alarm.com).
8.1 - CONNECTIONS AND MANAGEMENT BY CAN-BUS LINE
8.2 -
8.3 - CONNECTIONS TO TURN INDICATORS
The 933 system can operate in various modes according to the vehicle on which it is installed and
depending on the connections that can be made.
The CAN-BUS mode offers yet another operating solution.
It enables the system to be managed through the CAN-BUS line and operate in combination with the
CAN signals, with the turn indicators flashes and/or the door lock motor unit.
The system automatically manages the different arming/disarming signals.
Consult the tecnical installation charts for the available connections for each vehicle.
The various arming modes are listed below and the connections indicated in the following paragraphs.
Arming through
Arming through door lock motor unit
Arming through self-learning of turn indicators flashes
Arming through turn indicators flashes and door lock motor unit
Arming through turn indicators flashes, door lock motor unit and
Therefore only connect the alarm system CAN BUS line to the vehicle CAN line wires
System arming/disarming connections must be made to the vehicle door lock motor unit (polarity
inversion).
CONNECTIONS TO DOOR LOCK MOTOR UNIT
If turn indicators flashes are identical on locking and unlocking, connect the door lock
motor unit.
If the turn indicators flash when unlocking with the car mechanical key, do not make this
connection.
!
!
To armi/disarm the system, connect the WHITE-ORANGE wire to a wire of the turn indicators.
8.4 - “MIXED” CONNECTION OPTION
This type of connection allows the system to operate through the CAN BUS line with the turn indicators
or the door lock motor unit or both.
The system automatically manages the different lock/unlock signals according to the programming
and the connections made.
PAGE 08 - INSTALLER MANUAL INSTALLER MANUAL - PAGE 09
GEMINI 933
SYSTEM
GEMINI 933
SYSTEM
GEMINI 933
SYSTEM
RIGHT TURN
INDICATORS
LEFT TURN
INDICATORS
ORANGE
WHITE-ORANGE
ORANGE
TURN INDICATORS
CONTROL UNIT
ORANGE
WHITE-ORANGE
ORANGE
7.2 - CONNECTIONS FOR VEHICLES WITH SEPARATE LINES
7.3 - CONNECTION TO HAZARD PUSH-BUTTON
VEHICLE
ELECTRICAL
EQUIPMENT
BLUE
WHITE-ORANGE wire must ONLY be
connected if the system is to operate
through turn indicators.
WHITE-ORANGE wire must ONLY be
connected if the system is to operate
through turn indicators.
Insert nr. 6
2 Ampere
diodes.
Select “optical pulse signals”
in the “SYSTEM
PROGRAMMING” menu.
Do not make this connection
if the system is to operate
through turn indicators.
Front
LH
Rear
RH
Side
LH
Side
RH
Rear
LH
Front
RH
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gemini 932 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gemini 932 in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gemini 932

Gemini 932 User Manual - German - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info