479874

Gemini 7090 Manual

3
Zoom out
Zoom in
Previous page
1/9
Next page
WORKING DESCRIPTION
- Alarm arming with the transmitter: push on the transmitter’s 1 button. One pulse of the direction indicator
lights and the door closure signals the arming.
- Alarm arming with electronic key: approach the key to the appropriate socket found in the vehicle passenger’s
compartment. The arming is signalled through a direction indicator lights flashing; the doors closure is not
activated.
- Alarm arming with exclusion of the volumetric sensor, external sensors and comfort control after the
alarm arming: while alarm armed, during the inhibit time (Led lightning fix) push on the transmitter 2 button. The
arming is signalled by one pulse of the direction indicator lights and the door closure, the comfort function and the
sensors are excluded.
NOTE: This function de-activates at the first arming of the alarm.
- Alarm disarming with the transmitter: push on the transmitter’s 1 button. The disarming is signalled through
3 pulses of the direction indicator lights or 5 pulses if an alarm condition has occurred.
- Alarm disarming with the electronic key: with the alarm armed open the vehicle’s door and approach the key
to the appropriate socket. The disarming is signalled through 3 pulses of the direction indicator lights or 5 pulses
if an alarm condition has occurred.
SPECIAL FUNCTIONS
SELF-LEARNING OF THE CODE OF A NEW TRANSMITTER OR A NEW ELECTRONIC KEY.
1. FOR THE USER.
While alarm disarmed turn the ignition key to ON, open the driver’s door and push on the transmitter 2 button.
The Led and the direction indicator lights activate. Turn the ignition key to OFF and push on the new
transmitter 1 button or approach the electronic key to the receptacle within 8 seconds from the Led and the
direction indicator lights switching off.
For each new code it is necessary to turn the ignition key to ON and then to OFF. At the end of the self-learning
operation, after 8 seconds the system works normally.
2. FOR THE INSTALLER.
While alarm disarmed push on the button found in the 7090TN unit positioned in the right and rear side of the
angle of the printed circuit. Turn the ignition key to ON for 1 second and then to OFF and push on the new
transmitter 1 button or approach the electronic key to the receptacle.
For each self-learning of the new code it is necessary to turn the ignition key to ON for one second and then to
OFF. At the end of the self-learning operation, after 8 seconds the system works normally.
NOTE: the system is supplied with a maximum number of 8 devices (transmitters and keys).
ENGINE IMMOBILISATION.
The engine immobilisation (with the 7 function activated) is obtained 60 seconds from the engine switching OFF.
The Led lights quickly. To de-activate the engine immobilisation it is necessary to turn the ignition key to ON and to
push on the transmitter 1 button or to approach the electronic key to the receptacle. When the Led stops flashing it
is possible to start the engine.
NOTE: THE ARMING OF THE ENGINE IMMOBILISATION ACTIVATES ALWAYS 60 SECONDS AFTER THE ENGINE SWITCHING OFF (IF
THE FUNCTION HAS BEEN ACTIVATED IN THE PROGRAMMING).
REMOTE CONTROLLED BOOT OPENING.
The alarm unit 7090 allows opening the vehicle boot if the control is electric and negative. This function is obtained
(if the 3 function is activated) pushing on the transmitter 2 button with alarm disarmed.
If the boot opening is carried out pushing on the transmitter 2 button with the alarm armed (if the 4 function is
activated), the panic function will de-activate and all the inlets inhibit for 60 seconds. To avoid the alarm triggering, it
is necessary to close the boot within this delay time. The opening of the boot is signalled by one pulse of the
direction indicator lights.
PANIC FUNCTION
To obtain this function with the alarm armed after the neutral time push on the transmitter 2 button. The siren, the
klaxon and the direction indicator lights activate. To de-activate this function push on the transmitter 2 button within
the 10 seconds of the alarm cycle.
LEDS MEMORY.
At the alarm disarming it is possible to verify the alarm triggering cause turning the ignition key to ON. Following the
Led flashing it is possible to identify the triggering cause.
Signalling LED Alarm triggering Alarm cycle
¬l¬ Ultrasonic sensor 10
¬¬l¬¬ Door and boot/bonnet pin switches. 10
¬¬¬l¬¬¬ Ignition live Unlimited
¬¬¬¬l¬¬¬¬ External sensors 10
¬¬¬¬¬l¬¬¬¬¬ Voltage drop sensor 10
l LED OFF (2 seconds) ¬ LED ON (1 second)
Each alarm cycle is 30 seconds.
The inhibit time is 30 seconds for all alarm triggering’s cause.
GARAGE POSITION.
The user can select this function with the transmitter only if the function of the engine immobilisation has been activated.
The garage position allows the user to exclude temporarily the ACTIVATION of the ENGINE IMMOBILISATION in order to
leave the vehicle in the servicing or in the washing centres without giving the original transmitters or the electronic keys to
the staff.
Activation of the Garage function.
1. While alarm disarmed, turn the ignition key to ON.
2. Turn the ignition key to ON, within 15 sec. push on the transmitter 2 button. The LED signals the activation of
the function with 2 pulses.
NOTE: do not open any door during this period. The procedure of the Garage function will automatically annul
if the button is not pressed within the 15 sec.
3. Turn the ignition key to OFF position.
In this condition it is possible to start the engine of the vehicle for a max. of 20 attempts without obtaining the
passive arming of the system.
The correct working of the GARAGE position is signalled by one acoustic signalling while starting the vehicle
engine and through the fast flashing of the Led if the ignition key is in ON position.
De-activation of the Garage function.
The de-activation of the GARAGE function is obtained arming the alarm system with the transmitter or the electronic
key or automatically at the end of the 20 attempts to start the engine.
ULTRASONIC ADJUSTMENT AND TEST PROCEDURE
The LED supplied with the kit is also used to signal the adjustment of the volumetric sensor.
The procedure is the following:
- Lower one of the front windows 20 cm. approximately.
- Adjust the trimmer to a medium sensitivity.
- Arm the alarm with the sensor exclusion function and wait till the end of the inhibit time signalled through the
flashing Led.
- Push a hand through the open window and move it. The LED will flash when the movement has been detected. If
the LED does not flash increase the sensitivity and repeat test.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gemini 7090 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gemini 7090 in the language / languages: English as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info