749311

Geha S7 CD Shredder Manual

9
Zoom out
Zoom in
Previous page
1/60
Next page
9
INSTALLING DOCUMENT SHREDDER
1. First insert the inner container (for CDs/DVDs) into the paper bin.
2. Place the document shredder on a paper bin. Ensure that it is stable. Take care not to squee-
ze your fingers between the upper edge of the bin and the cutting unit.
IMPORTANT
The document shredder can only be placed on the bin in one direction. Ensure that the shredder
is properly positioned on the paper bin.
3. Connect the power plug to a standard 220-240V AC socket.
7. Before moving, transporting or cleaning the device and prior to emptying the bin, switch off
the document shredder and disconnect it from the power mains.
8. Empty the bin frequently to prevent jamming of paper in the cutting unit.
9. Never leave the document shredder unattended, especially when there are children and pets
in the vicinity.
10. Never open the device housing. If you encounter problems, please contact your dealer.
11. It is forbidden to operate the device with a damaged power cord.
The sliding switch at the top of the device can be set to three (3) positions.
1. AUTO: The shredding process is started automatically as soon as the paper to be shredded
is inserted into the feeder slot. After shredding is completed, the device is automatically
switched off.
2. REV is used for two purposes:
a) Eliminating paper jams. Before the shredding cycle is completed, the cutting unit is set
to reverse mode to free the shredder blades. If you become aware that too much paper
has been fed into the shredder so that the shredding process is slowed down, immedia-
tely set the switch to REV position. Also do this, if you have inadvertently inserted paper
that is not to be shredded.
b) Shredding CDs/DVDs and credit cards: Insert CDs/DVDs or credit cards individually into
the feeder slot provided
3. To empty the bin or to switch off the device as it will not be used for a prolonged period of
time, set the switch to OFF and disconnect the shredder from the power socket.
The device is exclusively designed for use in enclosed rooms and for short-time operation not
exceeding two minutes. Do not operate the document shredder outdoors.
The shredder features a “Clear” button. Please press this button if you wish to terminate shredding
or if all paper has been shredded before the two-minute cycle is completed. When the „Clear“
button is pressed, all paper is pulled into the bin.
STARTING DOCUMENT SHREDDER
The S7 CD cuts up to seven sheets of paper (DIN A4, 70g/m²) at a time. The maximum permissible
paper width is 22 cm. To cut small pieces of paper such as envelopes and credit card receipts, insert
them at the centre of the feeder slot. Please ensure that the permissible number of sheets to be
processed at any time by the cutting unit is not exceeded, as the device might otherwise be damaged.
SHREDDER CAPACITY
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geha S7 CD Shredder at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geha S7 CD Shredder in the language / languages: English, German, Dutch, French, Italian, Polish, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info