762351

Geemarc WATCH N SHAKE 10 Manual

3
Zoom out
Zoom in
Previous page
1/4
Next page
7. Press S2 to Confirm the selected minute. A flashing Year digit will be displayed
8. Press S1 repeatedly to scroll to the correct Year
9. Press S2 to Confirm the selected Year. A flashing Month digit will be displayed
10. Press S1 repeatedly to scroll to the correct Month
11 Press S2 to Confirm the selected Month. A flashing date digit will be displayed
12. Press S1 repeatedly to scroll to the correct date
13. Press S2 to Confirm the selected date. A flashing Weekday will be displayed
14. Press S1 repeatedly to scroll to the correct Weekday
15. Press S2 to Confirm the selected Weekday
The watch hands will now spin to match the LCD time setting, if the time has been reset as above- Please WAIT until the watch resumes
normal operation i.e. when WAIT is no longer displayed on the LCD.
USING THE WATCH
LCD Display Selection
You can set the LCD to show either one of the following digital readings:
Time (hour, minute and seconds). You have the choice to display time in either 12 or 24 hour format
Battery Level
Weekday (in either German or English)
Date/Month
Month Date
To move between these options, keep pressing S2 (the lower right button) until you find the desired digital reading
LCD Backlight
Press S1 once to turn on the LCD backlight / the backlight will remain on for approximately 3 seconds.
Low Battery Warning
When the battery level is low, the LCD will show a flashing “Low Battery” icon. It is time to charge your watch (See Setup).
ALARM
You can set up to 4 separate alarm times on this watch. When an alarm is set off, the watch will vibrate. When the watch is vibrating the
analogue hands pause and the LCD will switch off. The vibrating alarm will stop after 15 seconds and then the LCD will be switched back on
and the analogue hands will move rapidly to the correct time.
Alarm Time Check
Press S3 once to show the first alarm time. If you press S3 again, the second alarm time will be displayed and so on until the fourth alarm
time has been displayed. The alarm ON/OFF icon is also displayed according to each alarm reading.
Press S3 once again to exit from the fourth alarm setting or else the watch will exit the alarm display and return to regular LCD display
automatically after 30 seconds.
Alarm Time Setting
1. Keep pressing S3 repeatedly until you see the alarm number you wish to set the time for (AL-1, AL-2, AL-3 or AL-4).
2. Wait 1 second and the LCD will show the alarm time
3. Press S2. The alarm time will start flashing
4. Press and Hold S1 to set the Alarm Hour
5. Press and Hold S2 to set the Alarm Minutes
6. Press S3 once to confirm and exit
The alarm is automatically set to ON when a new alarm time has been set.
Please note: the alarm time will display for 30 seconds and then Exit if no alarm setting is detected.
Setting Alarm On/Off
1. Keep pressing S3 until you get to the alarm number you wish to set On or Off (AL-1, AL-2, AL-3 or AL-4).
2. Wait 1 second and the LCD will show the alarm time
3. Press S4. This button can toggle between Alarm On or Off. When the Alarm is On, is displayed.When the Alarm is off, no alarm icon is
displayed.
4. Press S3 once to confirm and exit or the watch will exit by itself after 30 seconds from your last alarm time reading.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geemarc WATCH N SHAKE 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geemarc WATCH N SHAKE 10 in the language / languages: English as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Geemarc WATCH N SHAKE 10

Geemarc WATCH N SHAKE 10 User Manual - German - 4 pages

Geemarc WATCH N SHAKE 10 User Manual - French - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info