568047

Geemarc MYDECT 100 Manual

25
Zoom out
Zoom in
Previous page
1/72
Next page
Amplified Big-Button Cordless
Telephone
MyDECT 100
1
CONTENTS 1
INTRODUCTION 4
Unpacking the Telephone 5
DESCRIPTION 6
INSTALLATION 14
Location 14
Setting Up 15
Battery Use 16
HANDSET SETTINGS 17
On/Off Settings 17
Alarm Setting 18
Audio Setup 19
Ringer Setup 20
Tone Setup 22
Language Setting 23
HS Label 24
Auto Answer 25
Date & Time Setting 26
Select Base 28
Handset Default 29
CONTENTS
2
BASE SETTINGS 30
Terminate Handset 30
Dial Mode Setting 31
Flash Time Setting 32
Modify PIN 33
Base Default 34
USING THE TELEPHONE 35
Making a Call 35
Receiving a Call 36
Hands Free 37
Mute Function 37
Receiving Volume 38
Last Number Redial 38
Recalling Recent Numbers 38
Adding Recent Numbers to the Phone Book 39
Deleting Recent Numbers 40
Flash Signal 42
Paging the Handset 42
Call Timer 42
Key Lock 43
CALLER ID 44
View Caller ID Book 45
Dial a Number from the Caller ID Book 45
Add a Number from the Caller ID Book to the Phone
Book 46
Delete a Number from the Caller ID Book 47
Delete all Numbers from the Caller ID Book 47
CONTENTS
3
PHONE BOOK 48
Create a Phone Book Entry 49
View Phone Book Entries 51
Dialling using a Phone Book Entry 51
Modify a Phone Book Entry 52
Delete a Phone Book Entry 54
Delete all Phone Book Entries 55
Phone Book Status 56
ADDITIONAL HANDSETS & BASES 57
Register a New Handset 58
Select a Base 59
Release a Handset 59
Internal Calls 60
Call Transfer between Handsets 61
Three Way Conference Call 62
CALL WAITING 63
Caller ID on Call Waiting 63
TROUBLESHOOTING 64
SAFETY INFORMATION 66
GUARANTEE 67
RECYCLING DIRECTIVES 69
CONTENTS
4
Congratulations on purchasing your Geemarc MyDECT100
TM
telephone. This telephone offers all the advantages of cordless
technology (compliant with Digitally Enhanced Cordless
Telecommunications-DECT standard) together with an easy to
see big button keypad, ideal for those who suffer with poor sight.
This telephone is also hearing aid compatible.
Its is important that you read the instructions below in order to use
your Geemarc telephone to its full potential. Keep this user guide
in a safe place for future reference.
This guide explains how to use the following telephone:
MyDECT100
TM
This guide applies to single and multiple handset systems.
INTRODUCTION
5
Unpacking the Telephone
When unpacking the telephone, you should find the following in
the box:
• 1 MyDECT100
TM
handset
• 1 MyDECT100
TM
base
• 1 Mains power adaptor
• 1 Telephone line cord
• 2 x AAA Ni-MH rechargeable batteries
• 1 User Guide
For product support and help visit our website at
www.geemarc.com
Telephone 01707 384438
Or fax 01707 372529
INTRODUCTION
INTRODUCTION
6
General Description
Handset Description (front)
DESCRIPTION
DESCRIPTION
LCD Dis
p
la
y
Redial Key
Ear
p
iece
Dial /
Speaker Key
Numerical
Keypad
Menu /
OK Key
Cancel /
Mute Ke
y
Scroll down /
Phonebook Key
End / Power Key
Scroll up /
Caller ID Key
Microphone
Intercom Key
7
Handset Description (Rear)
Battery
Compartment
Cover
Speaker
Contacts
Battery
Ct
DESCRIPTION
8
Base Description (Top)
Base Description (Base)
DESCRIPTION
Charging Pins
Pa
g
e Button
DESCRIPTION
9
Dial/Speaker key
Make/Answer a call
Activates the speakerphone if pressed during a
call
End/Power key
End a call.
Long press to power the telephone on and off
Navigation Button
Up/CID key
Scroll up through lists and menu options.
Increase the earpiece/speakerphone volume
during a call.
Enter the Caller ID book
Down/Phonebook key
Scroll down through lists and menu options.
Decrease the earpiece/speakerphone volume
during a call.
Enter the Phonebook
INT key
Set up an internal call to another handset.
Transfer an incoming call to another handset.
Set up a conference call with an external line
and an internal handset.
Redial key
Enter the redial book
Insert a pause when pre-dialing a number.
DESCRIPTION
10
Menu key (left)
Enter the menu functions in standby mode.
Confirm selections & actions.
Performs "Flash" function..
Menu key (right)
Return to the previous menu.
Activate mute during a call.
Delete an incorrect character/digit
Star key
Press and hold to turn on/off keypad lock
function.
Set up a conference call,
DESCRIPTION
11
LCD Screen Description
The LCD screen is split into two distinct areas:
The icon area. This is found at the top of the screen. This
displays the various system icons which help you to use the
telephone.
The main area. This is found across the centre of the screen. It
displays the following:
• number being dialled
• caller ID information
• phonebook
• menu information
• in standby mode, handset number and current time
Signal Strength icon
This is always displayed when your telephone is
switched on. It shows the current signal
strength. More bars indicate more signal
strength. If the handset is too far from the
base,this icon will blink on the LCD.
Line icon
This indicates that the line is engaged i.e. off
hook
Hands-free
This indicates that hands-free is activated
New Call icon
This indicates that you have missed one or more
calls
Key Lock icon
This indicates the keys are locked
Battery Status icon
This is always displayed when your telephone is
switched on. It shows the level of battery
charge. More bars indicate more battery charge
DESCRIPTION
12
LCD Screen Navigation
The (left side) key is used to activate the menu. The
is used to deactivate the menu and return to standby mode from
any menu.
The and keys are used to scroll through the menu.
: move backward through the menu
: move forward through the menu
The
(left side) key is also used to confirm an action or
choice on a screen.
The (right side) key is used to cancel an action/entry.
If you press
(right side) from any menu (except whilst in
number input mode), the telephone returns to the previous screen.
If you press and hold (right side) from any menu (except
whilst in number input mode), the telephone returns to standby
mode.
The telephone will automatically return to standby mode from any
menu if no button is pressed for 30 seconds.
DESCRIPTION
13
Menu Map
Caller ID Book
Phone Book
Add Entry
Change Entry
Delete Entry
Delete All
PB Status
BS Setting
Terminate HS
Dial Mode
Flash Time
Modify PIN
BS Default
HS Setting
Alarm
Audio Setup
Ring Setup
Tone Setup
Language
HS Label
Auto Answer
Date & Time
Select BS
HS Default
Register
DESCRIPTION
14
Location
Ensure you situate the telephone close enough to the power
socket so that the cable will reach safely without stretching. Also,
the mains power needs to be easily accessible in case you need
to disconnect the power.
Make sure the telephone is at least 1 metre away from other
electrical products e.g.TV, radio and monitors so as to avoid
interference. Also, avoid direct heat and sunlight.
We advise you to place the telephone on a table cloth or similar,
as the rubber feet on the base can mark some surfaces
Handset Range
The telephone has a range of 30-50 metres indoors and up to 300
metres outdoors. The range will be reduced when there is no
clear line of sight between the base and handset. Place the base
as high as practically possible to ensure the best signal between
the base and the handset. The icon at the top left of the LCD
display will blink and the signal strength bars will disappear to
warn you if you have moved out of range of the base. You will
need to move closer to the base station as the telephone line
might be disconnected and the handset will return to standby.
This icon will
blink when
handset is out
of range
INSTALLATION
15
Setting Up
Plug the power cable into the power socket on the base. Plug
the adaptor end of the power cable into the mains supply and
switch the supply on. (*)
Connect the line cord plug to the line socket on the base.
Connect the other end of the line cord to the PTT socket. (**)
Install the rechargeable batteries in the handset. The handset
requires two Nickel Metal Hydride (NiMH) AAA batteries. These
are supplied with your telephone. Slide the battery cover in the
direction of the arrow and pull it out. Check the battery polarity
diagrams on the handset when inserting the batteries. Fit the
battery cover by sliding the cover on to the back of the handset
until it snaps shut.
Place the handset on the base, a short beep will be heard. The
battery symbol
will be displayed on the handset. Once the
handset is fully charged, the display will show a full battery symbol.
The telephone has an automatic charging control to avoid
excessive charging.
Before the handset can be used, the handset batteries must be
charged for a minimum of 15 hours on the MyDECT100TM base.
(*) Classified “hazardous voltage” according to EN60950 standard
(**) Classified TNV-3 according to EN60950 standard.
INSTALLATION
16
Battery Use
The icon is continuously displayed at the top right corner of
the LCD display. The icon indicates the level of battery power.
The more bars displayed, the more power available.
When the battery is too weak for the telephone to operate, the
handset will automatically switch off. Place the handset on the
base to charge the handset battery. Under ideal conditions, the
handset battery should give about 6 hours talktime or 150 hours
standby on a single charge.
INSTALLATION
17
On/Off Settings
When the handset is placed on the charger it automatically
switches on. Alternatively, press for about 5 seconds. The
telephone will enter subscription mode in which the handset is
searching for a registered base.
On successfully finding a base, the LCD window will display the
time (either set by yourself – see Handset Settings – Set Date &
Time or it will be set automatically when you receive a call
provided that you subscribe to a Caller ID service) and the
handset number. The telephone is now in standby mode and is
ready for use.
To turn the handset off, press for about 5 seconds again.
The LCD display will then switch off.
Note: When battery power is very low, the following is displayed.
You must recharge immediately – replace the handset on the
base.
HANDSET SETTINGS
18
Alarm Setting
You are able to set an alarm and adjust the settings using the handset.
Press (left side) to activate the menu
Use and to scroll through the menu to select
‘HS SETTING’
Press (left side) to confirm
Press (left side) to select
‘ALARM’
Use and to scroll through the menu to select
‘ON’
or ‘OFF’
If you select ‘ON’ you will be prompted to enter the time
in HH:MM format (24 hour format). Enter the alarm time
using the numeric keypad.
Press (left side) to confirm
Use and to scroll through the menu to select
‘SNOOZE ON’or ‘SNOOZE OFF’
Press (left side) to confirm. Either press to
return to standby or wait 30 seconds
Notes:
Press any key to silence the alarm.
If you select ‘SNOOZE ON’, the alarm will ring at regular
intervals of 10 minutes until you set snooze or alarm to off.
HANDSET SETTINGS
HANDSET SETTINGS
HANDSET SETTINGS
19
Audio Setup
The hands free speaker volume can be adjusted. Likewise, if
using an earpiece, the volume heard through the earpiece can be
adjusted.
Press (left side) to activate the menu
Use and to scroll through the menu to select
‘HS
SETTING’
Press (left side) to confirm
Use and to scroll through the menu to select
‘AUDIO SETUP’
Press (left side) to confirm
Use and to scroll through the menu to select
‘SPEAKER VOL’or ‘EARPIECE VOL’.
Use and to scroll through the menu to select
required volume. There are 5 volume settings
Press (left side) to confirm. Either press to
return to standby or wait 30 seconds
HANDSET SETTINGS
20
Ringer Setup
Ringer Tones
There is a choice of 10 handset ringer tones to notify you of
incoming calls. You can select different tones to notify you if the
call is internal (from other handsets registered to the same base)
or external (from the telephone network).
Press (left side) to activate the menu
Use and to scroll through the menu to select
‘HS SETTING’
Press (left side) to confirm
Use and to scroll through the menu to select
‘RING SETUP’
Press
(left side) to confirm
Use and to scroll through the menu to select
‘INT RING/EXT RING’
Press (left side) to confirm
Use and to scroll through the menu to select
‘MELODY’
Use and to scroll through the menu to select
desired ringer tone/melody. As you scroll through, the
telephone demonstrates the selected tone/melody
Press (left side) to confirm. Either press to
return to standby or wait 30 seconds
HANDSET SETTINGS
21
Ringer Volume
There is a choice of five handset ringer volumes. The handset
ringer can also be turned off.
Press (left side) to activate the menu
Use and to scroll through the menu to select
‘HS SETTING’
Press (left side) to confirm
Use and to scroll through the menu to select
‘RING SETUP’
Press (left side) to confirm
Use and to scroll through the menu to select
‘INT RING/EXT RING’
Press (left side) to confirm
Use and to scroll through the menu to select
‘VOLUME’
Use and to scroll through the menu to select
desired ringer volume. As you scroll through, the
telephone demonstrates the selected volume
Press (left side) to confirm. Either press to
return to standby or wait 30 seconds
HANDSET SETTINGS
22
Tone Setup
A key tone is heard every time you press a key on the handset.
This can be switched to silent.
Note: Warning tones will still be emitted when an incorrect key is
pressed.
Press (left side) to activate the menu
Use and to scroll through the menu to select
‘HS SETTING’
Press (left side) to confirm
Use and to scroll through the menu to select
‘TONE SETUP’
Press (left side) to confirm
Press (left side) again to select
‘KEY TONE’
Use and to scroll through the menu to select
‘ON’ or ‘OFF’
Press (left side) to confirm. Either press to
return to standby or wait 30 seconds
HANDSET SETTINGS
23
Language Settings
The handset supports nine languages. You can select the
language used to display menu options.
Press (left side) to activate the menu
Use and to scroll through the menu to select
‘HS SETTING’
Press (left side) to confirm
Use and to scroll through the menu to select
‘LANGUAGE’
Press (left side) to confirm
Use and to scroll through the menu to select
the desired language. Each language will be displayed
in its own native translation
Press (left side) to confirm. Either press to
return to standby or wait 30 seconds
HANDSET SETTINGS HANDSET SETTINGS
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geemarc MYDECT 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geemarc MYDECT 100 in the language / languages: English as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Geemarc MYDECT 100

Geemarc MYDECT 100 User Manual - German - 84 pages

Geemarc MYDECT 100 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info