568102
8
Zoom out
Zoom in
Previous page
1/93
Next page
7
(1) Connect the power supply as shown in the diagram
(2) The transmitter/charger must be connected to the audio
OUTPUT sockets of the TV, audio equipment, cable or
satellite box, DVD or VCR player, etc. When an RCA type
cable is used the outputs jacks are red and white. Refer to
the diagram.
A Scart adapter(not included) may also be used. Use only
the red and white terminals.
NOTE: If the system is connected to a cable or satellite box
and to a DVD or VCR player it is necessary to turn off the
device which is not in use at the time. When using the DVD
or VCR player turn off the cable or satellite box. When
watching TV turn off the DVD and VCR player.
(3) Connecting a microphone
If needed, connect a condenser microphone using the
microphone socket located on the rear of the Transmitter
/charger.
When connecting to a TV or other equipment which has
digital audio output terminals, use either the included Toslink
cable (optical digital) or a coaxial cable, depending on which
type of output terminals are provided on the equipment.
Please refer to the connection diagram on page 6 or to the
user manuals of your TV and other equipment.
NOTE: When using CL7150 with a digital audio input signal
the TV audio output must be set to PCM mode. CL7150 is
not compatible with Dolby Digital. The PCM setting can
normally be done using the audio menu settings of the TV.
Please refer to your TV/DVD/Satellite/Cable Box user’s
manual for instructions for setting to PCM mode.
NOTE: If you wish to use the system to listen to TV while
the CL7150 is muted so as not to disturb others, the TV
audio output must be set to FIXED. Refer to the user manual
of your TV for instructions as to how to set to FIXED.
INSTALLATION
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geemarc CL7150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geemarc CL7150 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info