568035
11
Zoom out
Zoom in
Previous page
1/15
Next page
Listening to Messages
The display flashes to show how many new messages have been
received. If no new messages have been received the display shows total
messages (old).
Playback will always begin with any new messages. For example if there
are three old messages and two new ones, only the two new ones will be
played back, then the answering machine will return to standby mode.
Press the play button once again to listen to all messages, starting with the
oldest messages.
Press
/ to start playback.
If you want to pause during playback of a message press
and the
message will pause (max. 7 seconds).
Press again to resume playback.
When playback is finished you will hear two short beeps, and the machine
will return to standby mode. All incoming messages are saved (unless you
have erased any during playback, see below), new messages will then be
recorded after the old ones.
Other Functions available during Playback
Skip to next message
Repeats the current message, or hold down until you hear
a beep to step back through the messages
ON/OFF
Stop playback
C
Erase messages
Playback through handset receiver (+40dB volume)
To playback your messages through the handset, pick-up the handset and
press
. You can now you can press to boost the message
volume to 40dB
Delete Incoming Messages
If you want to delete a single incoming message press C while the
message is playing.
To erase all messages after playback, press and hold
C until a beep is
heard.
Please note that new messages cannot be deleted until they have been
played.
Call Screening
Incoming messages can be heard through the Speakerphone as they are
received. If there is no sound adjust the volume using the control on the
right hand side of the telephone.
If you want to speak to the caller, lift the handset. If the recording does not
stop automatically, press
on the answering machine, or press * (for 2
seconds) on the telephone.
Operating the Answering Machine Remotely
This answering machine can be accessed remotely using the keys of an
ordinary tone dialing telephone. Call the answering machine (using your
telephone number) and enter the remote code while the outgoing message
is playing. Once the code is accepted, several remote control commands
are available.
Remote Code
A confidential three digit code is required to activate/deactivate the
answering machine or listen to your messages from a remote external
telephone. The remote code is printed on the base of the machine.
ANSWERING MACHINE
ANSWERING MACHINE
19
20
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geemarc CL210A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geemarc CL210A in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Geemarc CL210A

Geemarc CL210A User Manual - German, French - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info