568035
5
Zoom out
Zoom in
Previous page
1/15
Next page
Setting Up
Connect one end of the curly cord to the handset. The other end of the
curly cord plugs into the socket on the left hand side of the CL210A unit.
Place the handset on the cradle.
Connect the line cord to the
socket located at rear of telephone and
then thread it through the groove toward the back of the unit. Connect the
plug at the other end of the line cord into the wall socket (**).
Connect the power supply to the socket located at rear of the telephone
then plug into a 13amp wall socket (*). Please choose a socket near your
telephone to enable you to unplug the mains power quickly in case of a
problem.
Wall Mounting
If you mount the telephone to the wall, you can hang the receiver on the
telephone without hanging up. You will find a small hook for this purpose
at the upper end of the receiver rest.
1. Install 2 screws with anchors into the wall. These should be one above
the other, 83mm apart, and extending 5mm out from the wall to hold the
telephone base securely.
2. Install the long telephone line cord into the jack in the base. Thread it
through the groove and plug it into modular wall socket (**).
3. Hang the base on the screws and pull it down to lock it on.
4. Connect one end of the curly cord to the handset. The other end of the
curly cord plugs into the socket on the left hand side of the CL210A unit
5. Turn the receiver hook 180 degrees so that the receiver can be placed
on-hook.
(*) Classified “hazardous voltage” according to EN60950 standard
(**) Classified TNV-3 according to EN60950 standard.
Ringer Volume Setting
A switch located on the right side of the CL210A allows the ringer to be
switched to HI, LOW or OFF.
Notification of Incoming Calls Settings
A 3 position switch located on the right side of the CL210A allows for the
following types of notification to be selected.
INSTALLATION
SETTINGS
The ringer is
activated
The ringer and shaker are
activated (shaker
needs to be connected – not supplied)
The ringer and strobe are
ac
tivated
7
8
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geemarc CL210A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geemarc CL210A in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Geemarc CL210A

Geemarc CL210A User Manual - German, French - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info