695920
12
Zoom out
Zoom in
Previous page
1/28
Next page
4.9.4 Delete the Entire Redial List
Using a handset:
1. Follow Steps 1 and 2 in section 4.9.1.
2. Press LEFT SOFTKEY and / to select DELETE ALL.
3. Press LEFT SOFTKEY to confirm.
4. Press LEFT SOFTKEY to reconfirm.
4.10 Find the Handset
This feature helps you find the misplaced handset(s).
You can locate the handset by operation on the base station as below.
In idle mode, press /HANDSET LOCATOR.
All the handsets registered to the base will produce the paging tone, and “PAGING” will
flash on the screen. You can stop the paging by pressing / / /
RIGHT SOFTKEY on any handset or /HANDSET LOCATOR on the base to stop
paging.
NOTE:
If there is an incoming call during paging, the phone will ring with the incoming call
instead of paging.
4.11 Make an Internal Call
This feature allows you to make internal calls, transfer external calls and make
conference calls. If the called handset is not answered within 60 seconds, it will stop
ringing and the calling one will return to standby mode.
4.11.1 Intercom
Using a handset:
1. In idle mode, press RIGHT SOFTKEY and the numbers of the registered
handsets will display except the calling handset.
2.
Enter the desired handset number you want to intercom with.
3. The called handset rings. Press or on the called handset to establish the
internal call.
4.11.2 Call All Handsets
Using a handset:
1. In idle mode, press RIGHT SOFTKEY and the numbers of the registered
handsets will display except the calling handset.
2.
Press 9 to ring to all registered handsets.
4.11.3 Transfer an External Call
Using a handset:
During an external call:
1. Press LEFT SOFTKEY and / to select INTERCOM.
2. Press LEFT SOFTKEY to select the desired handset you want to intercom
with.
3. The external call is put on hold automatically and the called handset rings.
4.
Press or on the called handset to establish an internal call.
5.
Press on the calling handset or put the calling handset on the charging cradle to
end the current call with the external party.
6. The external call is transferred to the called handset.
4.11.4 Make a 3-way Conference Call
The conference call feature allows one external call to be shared with the corded
base and cordless handset or two cordless handsets. The three parties can share the
conversation and no network subscription is required.
Using a handset:
During the external call:
1. Follow Steps 1 to 4 in section 4.11.3.
2. Press and hold on the calling handset to establish the conference call.
NOTE:
Any party (corded base or cordless handset) hangs up during a conference call will
leave the other party still in connection with the external call.
NOTE:
If only one cordless handset is registered to the base station, internal call will not be
available.
18 19
US
E
YOUR PHONE
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geemarc AMPLIDECT295 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geemarc AMPLIDECT295 in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Geemarc AMPLIDECT295

Geemarc AMPLIDECT295 User Manual - German - 28 pages

Geemarc AMPLIDECT295 User Manual - Dutch - 50 pages

Geemarc AMPLIDECT295 User Manual - Dutch - 2 pages

Geemarc AMPLIDECT295 User Manual - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info