2.5 Base Station Installation options
Your telephone base is ready for tabletop use. If you want to mount your telephone
on a wall, follow the steps to connect the telephone base with a standard dual-stud
telephone wall mounting plate. You may need a professional to install the mounting
plate.
2.5.1 Tabletop to Wall Mount Installation
1. Unplug the power adapter from the power outlet. Unplug the telephone line cord
from the wall jack (or DSL filter).
2. Put the corded handset aside. Hold down the switch hook on the telephone base,
and then slide the handset tab upwards to remove it from the slot. Rotate the
handset tab by 180 degrees. Then, replace the handset tab into the slot until it
locks into position.
3. Press down on the tabs of the wall mount bracket to release it from tabletop
orientation.
4. Rotate the wall mount bracket down and push it into the telephone base until it
clicks into place.
5. Plug the telephone line cord (or DSL filter) into the wall jack. Plug the power
adapter into a power outlet. Align the slots on the back of the telephone base with
the studs of the wall mounting plate.
6. Slide the telephone base down until it locks securely. Bundle the telephone line
cord and power adapter cord neatly with twist ties.
