520000
19
Zoom out
Zoom in
Previous page
1/34
Next page
If the handset is in power off mode, when you
p l ac e th e h a n d s e t o n t h e b a se , it
automatically turns on. To turn the handset on
or off in Standby mode, follow these steps:
1. To turn on the handset when it's off, press
and hold the key until you switch the
display on. On power up, the handset will
enter subscription mode and search for a
registered base. A message as shown
below will be displayed to the user, and the
signal icon will flash.
46
15
Note:
If the handset is successful in finding a
base, the handset will enter the Standby
mode, the display will show handset
number and the handset name (if you
have one saved as described on page 24),
signal icon, battery icon and current time.
If the handset is not successful in finding a
base, the handset will behave according to
the Out Of Range condition.
Turning Handset On/Off
2. To turn the handset off, keep the key
pressed until the display turns off.
Note:
Nothing will appear on the LCD when battery
power is very low. YOU SHOULD FULLY
CHARGE THE HANDSET BEFORE USING.
Searching...
TAM Functions (AMPLIDECT285™ only)
Announcement (AMPLIDECT285™ only)
It is necessary to record the announcement which
requests the caller to leave a message when
nobody is at home. The answer and record
message (Announce1) and the answer only
message (Announce2) can be up to 3 minutes
respectively.
Record Announce1
Auto-answer Announce1 is a conventional
message requesting you to leave a message. If
you have not recorded a personal Announce1, the
unit will play the default one "Hello, your call
cannot be taken at the moment, to record
your message, please speak after the tone".
2. Press the Select soft key to choose Announce.
3. Press Select key again to choose Announce1.
4. Press the key repeatedly to choose
Record, press the Select soft key.
5. You can record your announcement after a
tone. Recording will stop automatically after 3
minutes. You can also confirm and end the
recording by pressing the OK key. During
recording the LCD shows "Recording...".
If you want to change Announce1, do the
following steps to update it:
1. Press the TAM soft key in Standby mode.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geemarc AmpliDECT 285 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geemarc AmpliDECT 285 in the language / languages: English as an attachment in your email.

The manual is 3,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Geemarc AmpliDECT 285

Geemarc AmpliDECT 285 User Manual - German - 67 pages

Geemarc AmpliDECT 285 User Manual - Dutch - 38 pages

Geemarc AmpliDECT 285 User Manual - French - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info