764981
6
Zoom out
Zoom in
Previous page
1/8
Next page
FAILURE TO COMPLY WITH THE FOLLOWING WARNINGS MAY SIGNIFICANTLY SHORTEN
THE PRODUCT’S LIFE TIME, AND LEAD TO FAILURES AS WELL AS HAZARDOUS
CONDITIONS*. COMMON SENSE MUST ALWAYS PREVAIL WHEN EVALUATING THE
INSTALLATION AND/OR USE OF ANY ELECTRONIC CONTROL IN A FINAL APPLICATION.
The maximum ambient conditions this PRODUCT is subjected to (temperature, humidity,
etc.) are not to be exceeded.
This PRODUCT must be installed by a qualified personnel.
Only qualified personnel are to service this PRODUCT. There are no user serviceable
parts inside.
This PRODUCT is only compatible with Aeware's® in.tune™ products.
This PRODUCT should be installed on a clean flat surface.
The gasket on the back of the unit will prevent water infiltration inside, behind the
mounted surface. If the gasket is damaged, the user must seal the back of the unit with
silicone to avoid any leakage behind the mounted surface.
* HAZARDOUS CONDITION: A condition that is potentially damaging and/or dangerous to
its operator or surroundings. This includes, but is not limited to: fire, flooding or other
water damage, dielectric breakdowns (presence of high voltage), etc.
Warnings:
in.K175 AEWARE AUDIO/VIDEO KEYPAD
Radio models supported by in.k175™ are:
Aeware® in.tune™ / in.tune.110™
receiver model.
Aeware® in.pix™ audio/video model.
Compatibility:
3.58 (Length) by 2.15’’ (Width) by
0.20’’ (Height).
Soft gasket
Mechanical Specs:
Humidity: Up to 95 %
condensing
Operating temp.: -20 to 50˚C
Storage temp.: -30 to 70˚C
Environmentals:
IP rating IPX5
UV resistant
UL 1563
CSA C22.2 No.218.1
Standards:
Wiring Diagram: Drilling template:
Male to male 8-pin mini din cable
(supplied with wired remote)
Wired remote
in.k175™
in.tune
or
in.pix
To install the in.k175™, use the
drilling template to cut the surface,
peel off the backing paper of the
adhesive and stick the in.k175™ on
the surface.
(see illustration)
Installation:
scale 1 : 1
3.58 "
2.15 "
1.35 "
2.78 "
Cut along
Dashed line
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gecko in.k175 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gecko in.k175 in the language / languages: English as an attachment in your email.

The manual is 1,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info