617883
198
Zoom out
Zoom in
Previous page
1/212
Next page
198
设置
B1022-001 © 12-2011
D
D D
D -
- -
- 激活或取消自动触发冲水功能
激活或取消自动触发冲水功能激活或取消自动触发冲水功能
激活或取消自动触发冲水功能
一旦激活了自动触发冲水功能,则坐便器控制器始终
会在使用者离开坐便器时触发一次冲水。 无需手动操
作。
设置 1 = 已取消
设置 2 = 已激活
前提条件
前提条件前提条件
前提条件
坐便器控制器已处于待机状态。
若未同时遮住两个按钮,将触发一次冲水过程。
请移开双手,并重复这一过程。
1
请用双手以大约 5 厘米的间距同时遮住这两个按
钮。 数秒钟后,两个按钮都开始闪亮。 再过数
秒钟后,两个按钮 3 次闪红光,随后亮蓝光。
现在请移开双手。
2
用手遮住左侧按钮,直至亮橙光。 右侧按钮闪
亮。
3
再次用手遮住左侧按钮,直至它亮黄光。 右侧
按钮通过闪亮一再显示当前设置 1. 或 2.
(设置1=闪
设置 2 = 闪亮两次 )。
结果
结果结果
结果
您现在位于自动触发冲水功能的调节模式。
4
再次遮住右侧按钮,直至获得所希望的设置。
每遮住一次坐便器控制器便在两种设置
(1-2-1-2- ...) 之间切换。
5
请用双手以大约 5 厘米的间距同时遮住这两个按
钮,直至它们闪亮一次
结果
结果结果
结果
所希望的设置现已被储存。 坐便器控制器重新
处于待机状态。
E
E E
E -
- -
- 复位到出厂预置
复位到出厂预置复位到出厂预置
复位到出厂预置
B,C 和 D 这几种设置都被复位到出厂预置,参见概
览。
前提条件
前提条件前提条件
前提条件
坐便器控制器已处于待机状态。
`
遮住左侧按钮半分钟,直至两个按钮都亮红光。
这时会触发一次冲水过程。
结果
结果结果
结果
所有设置被重新复位到出厂预置。
198


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geberit Sigma 80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geberit Sigma 80 in the language / languages: All languages as an attachment in your email.

The manual is 5,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info