544886
10
Zoom out
Zoom in
Previous page
1/10
Next page
English
Operation Manual
1 The testing of the pneumatic safety edge takes place in the lower door position. Please
ensure that the safety edge is activated in the lower door position. The Aux. Limit switch
Close has to be used.
2 2 minute night light period is activated by every movement of the door. If the prewarning is
activated, the courtesy light starts 5 seconds before the door movement.
3 Red traffic light with prewarning
- prewarning 3 sec. flashing before automatic closing
- prewarning 3 sec. flashing before any movement of the door,
permanent on during the movement, 5 sec. post illumination period
Red traffic light without prewarning
- prewarning 3sec. flashing before automatic closing
- permanent on during the movement, 5 sec. post illumination period
4 Dip switch 4 "ON" = GO function on ( OPEN PUSHBUTTON ). The OPEN pushbutton opens
a door, reversing a closing door. DIP switch 4 OFF, the OPEN pushbutton only opens a
door.
LED Signals
LED flashing - operating state
LED 1 x flashing - Safety edge actuated
LED 2 x flashing - Photobeam activated / error, Safety edge
error or DIP 1 setting wrong
LED 3 x flashing - Primary safety device open or faulty
LED 4 x flashing - Runtime error
LED 5 x flashing - Error RAM / FLASH
LED 6 x flashing - No reply digital limitswitch
LED 7 x flashing - Error EEPROM
LED fast flashing - Automatic closing time has been started
Endposition adjustment
1. Set dipswitch 8 on.
2. Select open or closed endposition by pushing the „up“ pushbutton for open endposition
or „down“ pushbutton for closed endposition longer than zwo seconds.
3. A signal will confirm your selection.
4. Now, the controller works in „dead man“ mode. Move the door to the wished position.
To confirm this position, push the „stop“ pushbutton longer than zwo seconds.
5. A signal will confirm the adjustment
6. Go on with the other endposition if necessary. (Point 2)
7. Set dipswitch 8 off. The adjustment is finished.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Geba Tronic DC MiniMax 3 S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Geba Tronic DC MiniMax 3 S in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info