494180
6
Zoom out
Zoom in
Previous page
1/81
Next page
5
User Manual | HouseParty Rise 2 Wireless | GEAR4
TO ACTIVATE AND DEACTIVATE
THE ALARMS:
Press the Alarm button on the speaker until
the alarm you wish to activate is illuminated.
When the alarm is not illuminated,
it is deactivated.
To set the alarm:
Press the Alarm button on the speaker until
the alarm you wish to activate is illuminated.
Press and hold the Alarm button until the
hour digits begin flashing.
Turn the SNOOZE / SET button to adjust the
hour. Now press the SNOOZE / SET button
to save.
The minute display will now begin to flash.
Turn the SNOOZE / SET button to adjust the
minutes. Now Press the SNOOZE / SET
button to save.
The days of the week will start flashing. Turn
the SNOOZE / SET button to adjust between
weekends, weekdays or all week. Press the
SNOOZE / SET button to save.
Turn the SET button to scan through alarm
modes – iPod, FM or buzzer. Press the
SNOOZE / SET button to save.
Turn the SNOOZE / SET button once again to
adjust the volume level. Press the SNOOZE /
SET button to save.
Sleep / snooze functions:
SNOOZE
When the alarm sounds, press the
SNOOZE / SET button on the speaker.
The alarm will repeat after 10 minutes.
Press
to stop the alarm for that day.
If no buttons are pressed, the alarm will ring
continuously for 1 hour.
SLEEP
The sleep timer switches the unit off
automatically after a set interval.
To activate the sleep timer, press the
SNOOZE / SET button.
Turn the SNOOZE / SET button to cycle
through OFF, 10min, 20, 30...60. Press
SNOOZE / SET to confirm the Sleep Timer.
This is the time after which your speaker will
turn off.
To turn off the sleep timer, repeat the above
steps and rotate to OFF.
Note: When setting the above functions, the
speaker will return to its previous display after
5 seconds of no activity.
Factory reset:
To restore the speaker to its factory settings
press and hold the power button (
) for about
20 seconds.
PG533_HouseParty_Rise_2_Wireless_Manual_V1.6.indd 5 27/07/2012 11:16
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gear4 HouseParty Rise 2 Wireless at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gear4 HouseParty Rise 2 Wireless in the language / languages: English, German, French as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info