701745
29
Zoom out
Zoom in
Previous page
1/55
Next page
Aanwezig / Stay LED
De “AANWEZIG/STAY” LED is “uit” wanneer het systeem ingeschakeld werd in de “AFWEZIG/STAY” mode. De
“AANWEZIG/STAY” LED is “aan”, wanneer het systeem ingeschakeld werd in de “AANWEZIG/STAY” mode . Normaal is
(zijn) de toegangsdeur(en) dan vertraagd. De toegangsdeur(en) kunnen “direct” of terug “vertraagd” gemaakt
worden door telkens
op de [Aanwezig/Stay] toets te drukken terwijl het systeem ingeschakeld is.
Night LED (alleen NX-1248)
De “NIGHT” LED is “uit” wanneer het systeem ingeschakeld werd in de “AWAY” mode. De “NIGHT” LED is “aan”,
wanneer het systeem ingeschakeld werd in de “NIGHT” mode . Volgens de programmatie van uw installateur is (zijn)
de toegangsdeur(en) vertraagd of direct.
Functies voor het NX-148 LCD codeklavier
Systeem inschakelen in de “AFWEZIG” mode
De “AFWEZIG” mode wordt gebruikt wanneer de gebruiker het beveiligde pand verlaat en het volledige pand wenst
te beveiligen. Hierna wordt stap voor stap uitgelegd hoe het systeem in de “AFWEZIG” mode kan ingeschakeld
worden:
Stap 1: Sluit alle beveiligde deuren en ramen.
Het GEREED lampje zal oplichten of knipperen wanneer
alle beveiligde zones en detectoren of sensoren in rust
zijn. OPMERKING: als er een zone geblokkeerd werd,
dan kan de sensor in deze zone geactiveerd worden
zonder dat hierbij het GEREED lampje beïnvloed wordt.
Het beveiligingssysteem kan niet ingeschakeld worden
als het GEREED lampje “uit” is. Refereer naar de
paragraaf “Systeem gereed maken om in te schakelen”
voor meer details.
Als het VOEDING lampje “uit” is, dan is er geen netspanning aanwezig. Controleer de
betreffende zekering in de zekeringskast. Indien u de fout niet kunt oplossen,
contacteer uw alarminstallateur. Als het VOEDING lampje knippert, dan is er een
batterijfout. Contacteer uw alarminstallateur.
Stap 2: Voer uw 4- of 6-cijferige gebruikerscode in om het systeem in te schakelen.
Systeem ok
Aan: geef code
Systeem niet
gereed Info: tik
Systeem aan
alle zones ok
Het AFWEZIG lampje zal hierna oplichten.
U kan nu het beveiligde pand verlaten.
OPMERKING: Het AFWEZIG lampje zal snel knipperen tijdens de laatste 10 seconden van de
uitgangstijd om de gebruiker er attent op te maken dat de uitgangstijd bijna voorbij is. U kan
eventueel het systeem terug uitschakelen en daarna terug inschakelen als u meer tijd nodig
heeft om het pand te verlaten.
NX-8E/NX-8-EUR/ NX-6-EUR/NX-4-EUR Gebruikershandleiding Page 29
17/06/05
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for GE Security NX-4-EUR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of GE Security NX-4-EUR in the language / languages: Dutch as an attachment in your email.

The manual is 1,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info