553346
11
Zoom out
Zoom in
Previous page
1/87
Next page
11
CHRONOGRAPH FUNCTION
The Gc Automatic chronograph has a three-counter automatic chronograph
movement indicating the hour at 6, the minute at 12 and the second at
9 o’clock.
TO USE THE STOPWATCH:
This stopwatch is capable of measuring:
Chrono Hours elapsed up to 12 hours (6 o’clock eye)
Chrono Minutes elapsed up to 30 minutes (12 o’clock eye)
Stopwatch seconds up to 1 minute (9 o’clock eye)
Before using the stopwatch, reset the stopwatch Chrono hands to the ‘12’ and the ‘0’ position.
STANDARD STOPWATCH MEASUREMENT
1. PRESS pusher A to start timing
2. PRESS pusher A again to stop timing
3. PRESS pusher B to reset
ACCUMULATED ELAPSED TIME MEASUREMENT:
1. PRESS pusher A to start timing
2. PRESS pusher A again to stop timing
3. PRESS pusher A to restart timing
4. PRESS pusher A again to stop 2nd timing
5. PRESS pusher B to reset
SPLIT TIME MEASUREMENT:
1. PRESS pusher A to start timing of the rst and second events
2. PRESS pusher B to stop and record the timing of the 1st event
3. PRESS pusher B to catch up to the timing of the 2nd event
4. PRESS pusher A to stop the timing of the 2nd event and record the time
5. PRESS pusher B to reset. All stopwatch Chrono hands return to ‘12’ and ‘0’ position.
CORRECTIVE MODE FOR STOPWATCH ON A CHRONOGRAPH AUTOMATIC TIMEPIECE
On all Chronograph movements, if the largest hands do not reset perfectly back to the 12 o’clock or zero
position:
1. PULL crown to position 3.
2. If center stopwatch second hand or Chrono hands do not reset to the 12 o’clock or zero position, press
pusher A and B simultaneously for at least 2 seconds.
3. The center stopwatch second hand will rotate by 360 degrees to activate corrective mode.
4. If center stopwatch second hand or Chrono hands are not located at ‘12’ or ‘0’ position, either press
pusher A continuously or repeatedly until the center stop second hand moves by each interval and returns
to ‘12’ and ‘0’ position. Press pusher B once to activate corrective move of next minute Chrono hand, hour
Chrono hand, or 1/10 second Chrono hand. Press pusher A continuously or repeatedly until the minute
Chrono hand and hour Chrono hand or 1/10 second Chrono hand moves by each interval and returns to
‘12’ and ‘0’ position.
5. Press crown back to position 1 to activate the adjustment.
GENERAL INFORMATION
WINDING
The Gc Automatic chronograph is equipped with a high-quality mechanism with automatic winding. With
the slightest movement of your wrist, a silent rotor conveys power to the spring. When it is fully wound, the
minimum power reserve is 42-hours. The power reserve indicator on the dial indicates the level of power left
before rewinding the watch is necessary. If it has not been worn recently, we recommend winding your Gc
Automatic chronograph manually by winding the crown to position 1.
SCREW DOWN
The Gc Automatic chronograph has a screw down crown. It is important to screw it in correctly
and fully after each adjustment to ensure that the watch remains water resistant. Do not pull the crown unless it
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for GC Watches Smart Luxury at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of GC Watches Smart Luxury in the language / languages: German, French, Spanish as an attachment in your email.

The manual is 2,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of GC Watches Smart Luxury

GC Watches Smart Luxury User Manual - English - 57 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info