768325
33
Zoom out
Zoom in
Previous page
1/152
Next page
DEENIT
33
INSTALLATION OF THE BASE
Please select an appropriate seat in the vehicle.
NOTE! The ISOFIX anchorage points (2) are two met-
al lugs per seat and are located between the back-
rest and the seating surface of the vehicle. If you are in
any doubt, consult your vehicle instruction manual for
assistance.
NOTE! If the ISOFIX anchorage points (2) of your ve-
hicle are dicult to access, you should use the ISOFIX
insert guides (3) and fix them on the ISOFIX anchorage
points (2) permanently.
Release the ISOFIX connectors (4). Both ISOFIX con-
nectors can be adjusted independently. Push both
buttons (5) and (6) simultaneously and pull the
ISOFIX connectors out of the base to the end.
The ISOFIX connectors (4) must lock into the ISOFIX
anchorage points (2) with an audible click.
Make sure that the seat stays firmly in place by trying
to pull it out of the ISOFIX anchorage points.
The green safety indicator (7) must be clearly visible
on both ISOFIX release buttons.
Next, push the base in the direction to the backrest
until it is fully aligned with the backrest.
NOTE! Moving the base sideways will make sure it sits
tight against the backrest of the vehicle.
INSTALLAZIONE DELLA BASE
Collocare il seggiolino sul sedile dell’auto appropriato.
NOTA BENE! I punti di ancoraggio ISOFIX (2) sono due
linguette metalliche per seduta, posizionate tra lo schie-
nale e la superficie di seduta del veicolo. Se in dubbio
consultare il manuale istruzioni della vettura.
NOTA BENE! Se i punti di ancoraggio ISOFIX (2) del
veicolo sono dicili da raggiungere, utilizzare le guide
d’inserimento ISOFIX (3) e fissarle sui punti di ancorag-
gio ISOFIX (2) in modo permanente.
Sbloccare i connettori ISOFIX (4). Entrambi i connet-
tori ISOFIX possono essere regolati singolarmente.
Premere contemporaneamente i due pulsanti (5) e (6)
ed estrarre i connettori ISOFIX dalla base fino al fer-
mo finale.
I connettori ISOFIX (4) devono agganciarsi
saldamente ai punti di ancoraggio ISOFIX (2) con
un sonoro “click”.
Assicurarsi che il sedile rimanga saldamente
in posizione cercando di estrarlo dai punti di
ancoraggio ISOFIX.
L’indicatore di sicurezza verde (7) deve essere chiara-
mente visibile su entrambi i pulsanti di rilascio ISOFIX.
Quindi, spingere la base verso lo schienale fino a
quando si trova perfettamente allineata con esso.
NOTA BENE! Spostare lateralmente la base assicuran-
dosi che sia ben serrata contro lo schienale del veicolo.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for GB Uni-All at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of GB Uni-All in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 7,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info