Manual GB Everna-Fix (page 47 of 264) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

768337

Zoom out

Zoom in

1/264

DEEN

SWITCHING FROM GROUP 1 TO GROUP 2/3

First bring the headrest (16) in highest position for Gr.1

(5th position) till there is a block before you can start

with the switching. Follow the steps below:

• Loosen the shoulder belts (18) by pressing the adjust-

ment button on the central adjuster (25) and simul-

taneously pulling both shoulder belts up.

• Open the harness buckle (20) by pressing the red

button (27).

• Pull up the cover in the sitting area until the storage

compartment (30) for the harness buckle can

be accessed.

• Detach the shoulder pads (26) from the shoulder

belts (18) and the pad from the harness buckle (20).

• Now pull the harness buckle through the seat cover.

PASSARE DAL GRUPPO 1 AL GRUPPO 2/3

Per prima cosa portare il poggiatesta (16) nella posi-

zione più alta per il Gr. 1 (quinta posizione) ﬁnché c’è un

blocco prima di poter iniziare con la transizione. Seguire

questi passaggi:

• Allentare gli spallacci (18) premendo il pulsante per la

regolazione sul regolatore centrale (25) e tirando su

simultaneamente entrambi gli spallacci.

• Aprire la ﬁbbia dell’imbracatura (20) premendo il

pulsante rosso (27).

• Sollevare la copertura nella zona di seduta ﬁno

a quando il vano di stoccaggio (30) della ﬁbbia

dell’imbracatura diventa accessibile.

• Staccare le imbottiture (26) dagli spallacci (18) e dalla

ﬁbbia dell’imbracatura (20).

• Ora far passare la ﬁbbia dell’imbragatura attraverso la

fodera del sedile.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of GB Everna-Fix in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

GB Everna-Fix Manual

Product: