813426
39
Zoom out
Zoom in
Previous page
1/48
Next page
39
Undo the 3 screws securing the rear bracket and remove.
Replace the glass and gasket, ensuring that the printed side is
facing outwards.
FLUE SURE SYSTEM
If the appliance has been installed in a restrictive location, it may be
necessary to remove the appliance.
Locate the sensor in the draft diverter opening, and gently pull the 2
wires off the terminals.
From the side of the appliance remove the screw from the bracket.
The sensor is hooked over the lip of the draft diverter. Lift up to free
the bracket.
Screw
Ret the new sensor, ensuring that the plastic spacers are between
the sensor and the bracket.
Replace the bracket in reverse order and t the 2 leads.
If it has been necessary to remove the appliance, ensure that
all disturbed gas joints are checked for gas soundness when
reinstalled, and repeat the ue clearance test as detailed in the
Commissioning Section.
PRIMARY AERATION PLATE
NOTE: Not all models have aeration plates.
Please refer to the Technical Specication.
To replace the primary aeration plate turn off the gas supply at the
isolation device.
Remove the burner, see Installation Instructions, Replacing Parts,
Section 5.
Undo the 2 nuts and remove the plate.
Replace with the correct size plate and secure the 2 nuts. Ensure
that the lower edge of the plate is located over the venturi ange.
CHANGING BETWEEN GAS TYPES
A kit of parts is available for this - Contact your Gazco retailer for
further information.
It will be necessary to change the following:
- Burner
- Injector
- Pilot Injector
- Gas Valve
Always quote the Model number and Serial number when ordering
any spare parts.
CONTROL UPGRADE
See Installation Instructions.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Vogue Range Conventional Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Vogue Range Conventional Flue in the language / languages: English as an attachment in your email.

The manual is 7.15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info