813426

Gazco Vogue Range Conventional Flue Manual

12
Zoom out
Zoom in
Previous page
1/48
Next page
12
INSTALLATION INSTRUCTIONS
SITE REQUIRREMENTS
FLUE OPTIONS
FLUE & CHIMNEY REQUIREMENTS
WHEN INSTALLING A FLUE SYSTEM PLEASE REFER TO THE
MANUFACTURERS INSTRUCTIONS.
The European chimney standards now describe chimneys and flues
by their temperature, pressure and resistance to corrosion,
condensation and fire. To identify the correct flue system, the
minimum flue specification is shown in the Technical Specification.
Existing chimneys are not covered by this system.
The chimney or flue system must comply with the rules in force,
and must be a minimum of 127mm (5") in diameter.
A 5" (127mm) liner must be used if fitting the appliance into an
existing brick built chimney.
Larger lined flues can work, but in some instances could cause cold
start flue problems resulting in nuisance shutdown. Lined flues
above 7" (175mm) are not recommended.
Suitable systems are:
a) Flexible liner which must be continuous from the
appliance spigot to the roof terminal.
b) Gazco Linerless kit.
UNDER NO CIRCUMSTANCES MUST THE LINERLESS KIT BE
USED WITH ANY INSTALLATION OTHER THAN AN EXISTING
MASONRY CHIMNEY WHICH HAS A MINIMUM DIAMETER OF
178mm (7”). THE CHIMNEY MUST BE SOUND AND CLEAN. IF
PREVIOUSLY USED FOR SOLID FUEL, IT MUST BE SWEPT
PRIOR TO PROCEEDING WITH THE INSTALLATION.
NOTE: If the Linerless kit is to be used, due care should be taken
to prevent condensation forming in the chimney. Do not fit the
Linerless Kit if the chimney is taller than 10 metres (external wall)
or 12 metres (internal wall).
The minimum flue height for the appliance must be 3 metres (10ft).
Any horizontal flue run from the rear outlet must not exceed 100mm
from the back of the appliance.
The chimney or flue must be free from any obstruction. Any damper
plates must be removed or secured in the fully open position, and
no restrictor plates fitted.
The chimney must be swept prior to the installation, but it need not
be swept if it can be seen the chimney is clean and unobstructed
throughout its entire length.
Steel Register Plate
with Clamp that holds
the Flex Adapter
Flex Pipe Adapter
connects to stove
ue pipe
Stove Flue Pipe
running from the
stove to the Flex Pipe
Adapter
Stove
FLUE OPTIONS
Consult the rules in force.
NOTE: This appliance does not normally require any additional
ventilation when installed in GB.
A range of Vitreous Enamel Gloss Black ue pipe is available
to compliment the appliance. Please contact your Gazco
retailer for further information.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Vogue Range Conventional Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Vogue Range Conventional Flue in the language / languages: English as an attachment in your email.

The manual is 7.15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info