813425
24
Zoom out
Zoom in
Previous page
1/52
Next page
24
Mark and drill the top left hand xing hole.
Secure with a screw, see arrow A.
Do not tighten at this point.
10
B
A
Rear Exit
Spigot Hole
200mm ø
Level the wall mounting bracket and mark the remaining 3 holes,
arrow B.
Remove the wall mounting bracket and drill the xing holes.
Rear Exit only: Cut a hole for the ue exit (see Flue Assembly for
details).
Replace the wall mounting bracket and secure with the screws. Do
not tighten at this point.
Level the wall mounting bracket, adjusting if necessary. Tighten the
4 screws.
WARNING: This appliance is heavy and should be
handled with care. Two people must be used to lift
this appliance.
Hook the top of the bracket under the top of the carcass at an
angle and lower gently into position. Ensure that the bracket is fully
engaged.
1
2
2 Screws
Bracket
NOTE: The top rear edge of the appliance must locate between
the back lip of the wall mounting bracket and the raised
supports.
Partially Engaged
Fully Engaged
Stove Body
Stove Body
Wall Mounting
Bracket
Wall Mounting
Bracket
Raised Support
Back Lip
Secure through the base of the bracket from underneath with the 2
screws provided.
IMPORTANT: If it is required to access the rear
explosion relief for servicing the appliance must
rst be removed from the wall.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Vogue Range Balanced Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Vogue Range Balanced Flue in the language / languages: English as an attachment in your email.

The manual is 8.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info