813417

Gazco Vision Large MK2 Series Conventional Flue Instructions Manual

7
Zoom out
Zoom in
Previous page
1/36
Next page
7
User Instructions
It is essential to use high quality batteries (Duracell or
equivalent) when replacing batteries in the handset or
control box.
PLEASE ENSURE NO WIRES ARE TRAPPED
BEFORE REPLACING THE WALL PLATE. THE
LEAD IS EASILY DAMAGED.
4. Cleaning the Appliance
IMPORTANT: THE OUTER PANELLING OF THE
VISION IS MADE FROM GLASS. USE CAUTION
WHEN INSTALLING, REMOVING AND STORING AS
THE COMPONENTS ARE FRAGILE AND COULD
BREAK UNLESS HANDLED CAREFULLY.
4.1 Make sure the appliance and surrounds are cool before
cleaning.
Use:
– A dry cloth or stainless steel product to clean the
polished plate.
– A damp cloth for the painted frame.
– A damp cloth to clean the inner panels.
– Use a soft brush to clean the vermiculite panels.
4.2 All Models
Remove the front from the appliance by lifting clear of the
slotted hooks, see Diagram 4.
4
4.3 Using the hex key provided release the two window locks at
the top of the glass door, see Diagram 5.
The locks move from shut to open towards the outer edges
of the glass door.
5
4.4 Support the frame and let it fall gently forward.
4.5 Open it down to its stop position.
When closing the window ensure the window catches
are fully engaged.
UNDER NO CIRCUMSTANCES SHOULD THE
APPLIANCE BE USED WITHOUT THE CATCHES
HOLDING THE DOOR IN PLACE.
5. Flame Failure Device
5.1 This is a safety feature incorporated on this appliance which
automatically switches off the gas supply if the pilot goes out
and fails to heat the thermocouple.
IF THIS OCCURS DO NOT ATTEMPT TO RELIGHT THE
APPLIANCE FOR 3 MINUTES.
6. Running In
6.1 During initial use of a new GAZCO appliance a strong odour
will be encountered as various surface coatings become hot
for the rst time. Although these odours are harmless it is
recommended that the appliance is operated on maximum
for 4 to 8 hours in order to fully burn off these coatings. After
this period the odours should then disappear.
If the odours persists, please contact your installer for advice.
6.2 During the rst few hours of burning there may be
discolouration of the ames. This will also disappear after a
short period of use.
7. Servicing
7.1 The appliance must be serviced every 12 months by a
qualied Gas Engineer. In all correspondence always quote
the Model number and the Serial number which may be
found on the Commissioning Checklist (Page 3).
8. Ventilation
8.1 Any purpose provided ventilation should be checked
periodically to ensure that it is free from obstruction.
9. Installation Details
9.1 Your installer should have completed the commissioning
sheet at the front of this book. This records the essential
installation details of the appliance. In all correspondence
always quote the Model number and Serial number.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Vision Large MK2 Series Conventional Flue Instructions at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Vision Large MK2 Series Conventional Flue Instructions in the language / languages: English as an attachment in your email.

The manual is 4.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info