Manual Gazco Vision Large MK2 Series Balanced Flue Instructions (page 5 of 36) (English)

813416

Zoom out

Zoom in

1/36

User Instructions

IMPORTANT: YELLOW FLAMES TYPICALLY

APPEAR WHEN THE APPLIANCE HAS REACHED

NORMAL OPERATING TEMPERATURE. THIS CAN

TAKE UP TO 30 MINUTES.

WARNING: IF THE APPLIANCE FAILS TO LIGHT OR

BECOMES EXTINGUISHED IN USE, WAIT 3

MINUTES BEFORE ATTEMPTING TO RELIGHT.

2.2 There are 3 different modes available for controlling and

operating the appliance:

1. Manual Mode

2. Temp Mode (Automatic)

3. Timer Mode (Automatic)

2.3 In MANUAL MODE you can:

— turn on the main burner using the UP button

— regulate the flame from high to low and back

— turn off the burner leaving just the pilot burning

In TEMP MODE (Automatic) you can:

— set the room temperature so the thermostat in the remote

automatically maintains that temperature

In TIMER MODE (Automatic) the fire:

— turns on and off according to the set time periods

— automatically regulates the room temperature during the

set periods

NOTE: When operating the fire in Temp or Timer mode,

the pilot remains lit and the fire then automatically

switches on at programmed times to bring the room to

the set temperature whether or not you are in the room.

NEVER LEAVE ANY COMBUSTIBLE MATERIALS

WITHIN 1 METRE OF THE FRONT OF THE APPLIANCE.

Switching Between Modes

2.4 Press the SET button to change to Temperature Mode.

Press again to change to Timer Mode.

Keep pressing to run through all operating modes. These

are:

— MAN

— DAY TEMP

— NIGHT TEMP

— TIMER

and back to MAN

NOTE: MAN mode can also be reached by pressing

either the UP or DOWN button.

Manual Mode

2.5 Press the OFF button and the UP button simultaneously.

You hear several clicks and audible beeps as the fire begins

the ignition process, (up to 30 seconds).

Turning the appliance Off:

Press the OFF button to turn the appliance off.

FOR SAFETY, YOU MUST WAIT 30 SECONDS BEFORE

LIGHTING THE FIRE AGAIN.

Increasing the Flame Height:

Press the UP button once to increase flame height one stage.

Press and hold the UP button to increase to maximum.

Decreasing the Flame Height:

Press the DOWN button once to decrease flame height

one stage. Press and hold the DOWN button to decrease to

minimum. At the lowest point the fire goes to 'Standby

Mode' (Only Pilot lit).

NOTE: While pressing a button a symbol indicating

transmission appears on the display. The receiver

confirms transmission with a sound signal.

Temp Mode (Automatic)

2.6 The display shows the current room temperature.

To increase or decrease the fire’s output:

Press the SET button to select either the DAY TEMP or the

NIGHT TEMP mode by briefly pressing the SET button.

Hold the SET button until the TEMP display flashes and

then let go.

Set the desired temperature with the UP and DOWN arrows.

(Minimum temperature 5C, maximum 40C or 40F to 99F

when Fahrenheit is the preferred option).

Press the OFF button to stop the display flashing or wait

to return to TEMP mode.

NOTE: If you set a temperature that is beneath the

current room temperature, the fire automatically

switches to PILOT (Stand by).

If you would like the Night temperature control to turn

off then decrease the temperature until [--] is displayed.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Vision Large MK2 Series Balanced Flue Instructions in the language / languages: English as an attachment in your email.

The manual is 4.65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gazco Vision Large MK2 Series Balanced Flue Instructions Manual

Product: