813359

Gazco Vision - Electric Range Manual

7
Zoom out
Zoom in
Previous page
1/80
Next page
7
Press until shows.
Hold the button for 6 seconds.
Press ‘’ or ‘’ to move the cursor (a flashing underline).
Press the button in the corresponding week position to select
(the character is highlighted) or cancel (the character is displayed
normally) the current setting, the same time period can be selected
together.
Press the ‘’ button to move the cursor to the time period setting
area.
Press ‘’ or ‘’ button to choose hour or minute.
Press ‘+’ or ‘-’ to set the number.
A maximum of 3 timed heating periods can be set per day.
Minute increment / decrement by 15min per press.
Press to set the heating time for the selected day and return to
the week line.
Hold the button for 3 seconds or wait for 10 seconds to save
and exit the heating time period setting.
Press ‘’ or ‘’ to check the timer setting for the week timer
heating mode.
To turn heating off, return to Normal Control Mode.
When in Weekly Timer Mode switching the appliance off with
the remote will stop the light output. The heat output will
continue according to the timer settings.
ADJUSTING THE SET TEMPERATURE
Press the ‘+’ or ‘-’ button to increase or decrease the temperature
on the basis of COMF temperature.
COMF means the actual temperature is the same as setting.
ECO means the actual temperature is 2℃ lower than the setting
temperature.
ECO- means 4℃ lower.
COMF+ means 2℃ higher.
COMF++ means 4℃ higher.
ADAPTIVE START CONTROL
The heater will automatically determine the appropriate time to
heat to ensure that it will reach the set-pointed temperature at the
set time (up to 45 minutes prior to the set time).
ADVANCE MODE
The heating state can be advanced to the next period under both
the daily and week timer heating mode.
If the heater is on in the current period, pressing the button will turn
the heater off.
If the heater is off in the current period, pressing the button will turn
the heater on.
Heating output depends on the room temperature and setting
temperature.
Press to enter the Advance mode under the daily and week
timer heating mode.
Press again or timer period ends will exit the Advance mode.
WINDOW OPEN DETECTING
When the transmitter detects a rapid drop in room temperature,
it will be judged as an open window: the warning icon will be
displayed and the heating will be turned off automatically.
After indoor temperature rise or manual intervention (by operating
remote control), it will return to normal working state.
GB
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Vision - Electric Range at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Vision - Electric Range in the language / languages: English, German, Dutch, French, Italian, Spanish, Norwegian as an attachment in your email.

The manual is 6.05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info