813413
19
Zoom out
Zoom in
Previous page
1/48
Next page
19
Installation Instructions
6. Pebble & Stone Layout
PEBBLES & STONES MUST BE POSITIONED ACCORDING TO THE FOLLOWING INSTRUCTIONS TO GIVE THE CORRECT
FLAME EFFECT.
Layout for Studio 1
All pebbles can be identied by a number (ranging 1 - 18) on their underside. Pebbles 1, 3, 4, 5 & 12 have holes which locate onto a
burner stud (please note that the Studio 1 does not have Pebble 12).
6.1 Evenly spread the white stones over the fuel bed.
6.2 Position Pebbles 3*, 4*, 5* & 1* on to the locating studs in the burner tray.
NOTE: Pebble 4 on the front left corner of the burner tray and Pebble 5 on the front edge do not have a locating stud.
Once in position, place the remaining pebbles and embers in the below order, see Diagram 21.
Sparingly spread an amount of the Embaglow bres provided, covering the ports in the burner tray, see Diagram 21.
Ensure the material is placed loosely to create a random glow.
Take care not to use more than half a packet per application.
WARNING - DO NOT PLACE NEAR THE PILOT AREA.
21
4
18
3*
5
4*
16
5*
1*
18
18
Layout for Studio 2
All pebbles can be identied by a number (ranging 1 - 18) on their underside. Pebbles 1, 3, 4, 5 & 12 have holes which locate onto a
burner stud.
6.3 Evenly spread the white stones over the fuel bed.
6.4 Position Pebbles 1*, 12*, 3*, 4*, 5* & 1* on to the locating studs in the burner tray.
NOTE: Pebble 4 on the front left corner of the burner tray and Pebble 5 on the front edge do not have a locating stud.
Once in position, place the remaining pebbles and embers in the below order, see Diagram 22.
Sparingly spread an amount of the Embaglow bres provided, covering the ports in the burner tray, see Diagram 22.
Ensure the material is placed loosely to create a random glow.
Take care not to use more than half a packet per application.
WARNING - DO NOT PLACE NEAR THE PILOT AREA.
22
411
1*
2
18
3*
5
12* 4*
5*
1*
16
18
18
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Studio Freestanding Conventional Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Studio Freestanding Conventional Flue in the language / languages: English as an attachment in your email.

The manual is 8.4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info