813413
15
Zoom out
Zoom in
Previous page
1/48
Next page
15
2.10 Using a spanner secure the front of the appliance to the
Bench or Plinth with 4 washers and bolts supplied, see
Diagram 6.
6Bench Installation shown
Washers &
Bolts
Gas Installation
The appliance is supplied with an Inlet Extension Pipe to
aid installation from the appliance to the gas supply pipe.
2.11 To open the glass door use the hexagon key provided.
2.12 Release the window locks by moving them from shut to
open towards the outer edges, see Diagram 7.
7
2.13 To completely remove the glass front:
2.14 Support the frame and lower it gently forward down to its
natural stop position, see Diagram 8.
DO NOT EXERT PRESSURE ON THE DOOR ONCE
THERE IS RESISTANCE.
8
Installation Instructions
2.7 Remove the 2 screws and detach the front bottom trim,
see Diagram 3.
The battery box is located behind the front bottom trim.
When removing the front bottom trim disconnect the cable
from the battery box.
3
Screws
2.8 Carefully align the base of the appliance with the cutout
and xing holes in the Bench or Plinth. Carefully lower into
position, see Diagram 4.
4Bench Installation shown
Cutout
2.9 Using a spanner secure the back of the appliance to the
Bench or Plinth with 4 washers and bolts supplied, see
Diagram 5.
5Bench Installation shown
Washers &
Bolts
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Studio Freestanding Conventional Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Studio Freestanding Conventional Flue in the language / languages: English as an attachment in your email.

The manual is 8.4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info