813412

Gazco Studio Freestanding Balanced Flue Manual

26
Zoom out
Zoom in
Previous page
1/52
Next page
26
Separate the Embaglow material into smaller pieces and pull into shape to create a ne layer.
7.7 Sparingly spread an amount of the Embaglow bres provided, covering the ports in the burner tray, see Diagram 32.
Ensure the material is placed loosely to create a random glow.
Take care not to use more than half a packet per application.
WARNING - DO NOT PLACE NEAR THE PILOT AREA.
32
Layout for Studio 2
All logs can be identied by a letter (A - H) on their underside. Logs, C, E and B, also have holes to locate onto a burner stud.
7.8 Log E locates onto the 2 left hand pins and bracket towards the rear of the burner tray, see Diagram 33.
7.9 Log B locates onto the 2 central pins see Diagram 33.
33
E
B
7.10 Once in place, spread the lava rock around the burner tray.
Take care not to spill the lava rock into the pilot area and the air gaps at the front and rear of the burner tray.
The Studio 2 comes with 6 embers in total, 5 small and 1 large.
7.11 Position 2 small embers in each back corner. The third small ember ts against the back liner, between Logs E and B. The fourth is
positioned behind the right hand side of Log B. The large ember is positioned in the middle front of the burner tray, see Diagram 34.
Please note that the nal ember is placed after all the logs are in position.
34
Pilot Area
Air Gaps
Installation Instructions
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Studio Freestanding Balanced Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Studio Freestanding Balanced Flue in the language / languages: English as an attachment in your email.

The manual is 8.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info