813410
6
Zoom out
Zoom in
Previous page
1/36
Next page
6
5.10 Remove the 8 screws holding the glass frame, see Diagram 4.
Take care to support the glass when removing the screws.
4
5.11 Remove the glass frame and place carefully to one side.
5.12 Carefully remove the ceramic fuel bed components and
set aside. Protect floor coverings and follow the advice in
Section 7.
5.13 The logs should not require cleaning. Do not use a vacuum
cleaner or brush to clean the logs, any large pieces of
debris may be removed by hand.
5.14 Ensure any debris is removed from the burner ports.
5.15 Replace the ceramics, see Section 8.
5.16 Refit in reverse order.
5.17 Ensure that the rope seal on the back of the door is intact.
Replace the glass frame and tighten the 8 screws, see
Diagram 4.
5.18 Offer the decorative steel trim to the opening, inserting the 2
tags on the bottom of the trim behind the bottom panel. Lift
the top of the trim up and hook the lugs on the back of the
trim over the top of the glass frame, see Diagram 5.
5
NEVER OPERATE THE APPLIANCE WHEN THE GLASS
FRAME IS REMOVED, OR THE GLASS IS BROKEN.
5.19 Replace ALL of the securing screws ensuring that a screw is
present in all fixing slots.
UNDER NO CIRCUMSTANCES SHOULD THE
APPLIANCE BE USED IF ANY OF THE DOOR
RETAINING SCREWS ARE LOOSE OR MISSING.
5.20 Use a damp cloth to clean the outer casing of the appliance.
5.2 Carefully remove the ceramic fuel bed components and
set aside. Protect floor coverings and follow the advice in
Section 7.
5.3 The logs should not require cleaning. Do not use a vacuum
cleaner or brush to clean the logs, any large pieces of
debris may be removed by hand.
5.4 Ensure any debris is removed from the burner ports.
5.5 Replace the ceramics, see Section 8.
5.6 Ensure that the rope seal on the back of the door is intact,
locate the door on the 4 studs and slide back to the firebox.
Secure in place using the 4 dome nuts.
Do not over tighten the nuts, see Diagram 2.
NEVER OPERATE THE APPLIANCE WHEN THE DOOR
IS REMOVED, OR THE GLASS IS BROKEN.
5.7 Replace ALL of the securing nuts ensuring that a nut is
present on all fixing studs.
UNDER NO CIRCUMSTANCES SHOULD THE
APPLIANCE BE USED IF ANY OF THE DOOR
RETAINING NUTS ARE LOOSE OR MISSING.
5.8 Use a damp cloth to clean the outer casing of the appliance.
Steel Manhattan
THE GLASS FRAME IS FRAGILE. TAKE CARE
WHEN HANDLING TO AVOID DAMAGE.
5.9 To remove the glass frame lift off the decorative steel trim,
see Diagram 3.
3
User Instructions
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Small Steel Manhattan at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Small Steel Manhattan in the language / languages: English as an attachment in your email.

The manual is 3.42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info