813415
18
Zoom out
Zoom in
Previous page
1/36
Next page
18
Installation Instructions
2.8 Remove the touchpad/battery holder.
DO NOT PULL THE BRACKET AS THE TOUCHPAD AND
BATTERY LEADS ARE ATTACHED. PLACE TO ONE
SIDE. THIS IS TO ACCESS THE LEFT HAND FIXING,
SEE DIAGRAM 4.
Remove touchpad/
battery holder
4
A drilling template is supplied in order to locate the
fixing plates.
2.9 Following the template instructions.
Fix the two brackets either to the hearth or the bench, see
Diagram 5.
Brackets
5
2.10 Lift the appliance so as to locate the carcass onto the fixing
plates. There are two large holes the lower flanges on the
front edges of the base, see Diagram 6.
Flanges
6
2.11 Place the two large washers over the studs and fix with two
wingnuts, see Diagram 7.
Wingnut
Flange
Fixing Plate
Fixing stud
7
2.12 Replace the touchpad and battery holder.
ENSURETHEBLACKDECORATIVECOLLARISFITTED
TO THE TOP OF THE APPLIANCE PRIOR TO THE
INSTALLATION OF THE FLUE.
2.13 The flue system can now be connected to the appliance
ensuring all joints are sealed with a suitable fire resident
sealant. Use self-tapping screws at the flue spigot joint.
2.14 Connect a suitable pressure gauge to the test point located
on the inlet fitting and turn the gas supply on.
2.15 Temporarily replace the burner and light the appliance.
Check all gas joints for gas soundness.
2.16 Turn the appliance to a maximum and check that the supply
pressure is as stated on the databadge.
2.17 Turn the gas off and replace the test point screw.
Turn the gas back on and check the test point for gas
soundness.
3. Assembling the Appliance
3.1 Add the stone chippings or vermiculite, making sure they
are flattened and level with the rim of the tray
TAKE CARE NOT TO SPILL THE FUEL EFFECT INTO
THE PILOT AREA.
ONLY GENUINE GAZCO PARTS CAN BE USED IN THIS
APPLIANCE.
VermiculiteOnly:Usetheexactamountofvermiculite
supplied. This is just enough to cover the burner.
ENAMEL LINERS
The back panel is already in place.
3.2 Slide the lower panel into position, then the two side panel,
see Diagram 8. .
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Riva Vision Large MK1 Series Conventional Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Riva Vision Large MK1 Series Conventional Flue in the language / languages: English as an attachment in your email.

The manual is 3.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info