813415

Gazco Riva Vision Large MK1 Series Conventional Flue Manual

5
Zoom out
Zoom in
Previous page
1/36
Next page
5
User Instructions
NOTE: To select a function from the options displayed at the
bottom of the screen press the button directly below the
desired function.
2
2.6 To unlock the handset select Unlock followed by OK - the
symbol will change to an open padlock ( ).
2.7 There are 3 different modes available for controlling and
operating the appliance:
1. Manual Mode - See Page 6.
2. Automatic Mode - See Page 6.
3. Program Mode - See Page 7.
When a command from the handset is received a beep will
sound and the LED on the handset will briefly illuminate.
NOTE: The LED flashes every 4 seconds to show that it is
communicating with the appliance. After each command has
been accepted the LED will cease flashing until the
command has been carried out. Wait until the LED resumes
flashing before giving another command.
Advanced Controls
2.8 The thermostatic remote control handset has been pre-set
as follows:
a) Thermostat mode - the appliance will alter automatically
to achieve and maintain a desired room temperature in Auto
(Fixed Temp) or Program mode.
b) Gap temperature set at 2˚C - in Auto or Program mode
the appliance will automatically ignite if the room
temperature falls 2˚C below the fixed temperature.
c) Program mode enabled - this allows one of three
temperatures (Night temperature, Comfort temperature or
Off) to be set for each hour of the day on a daily or weekly
cycle.
d) Soft start enabled - in Auto or Program mode there is a
10 second delay between flame settings when more than
one change of setting is required (i.e. from High to Low).
e) Sounder ON - the appliance will beep to confirm that it
has received a command from the handset or touch pad.
f) Safety Temperature pre-set at 40˚C - the appliance will
automatically switch off if the room temperature (as
displayed on the handset) exceeds 40˚C.
NOTE: If the Safety Temperature is exceeded the appliance
can not be turned on again until the room temperature has
dropped below the safety temperature.
2.9 The LCD screen displays the following information, see
Diagram 3.
1) Time (24 hr clock)
2) Signal strength (between handset and appliance)
3) Selected Setting - set fixed temperature (in degrees)
when in Auto mode (small number)
4) Current room temperature (large number)
5) Button function
6) Child lock status (shown by open or closed padlock)
7) Current flame status (Low, Med, High)
8) Selected Mode - Manual Flame / Fixed Temp (Auto) /
Program - when appliance is switched on
9) Day of the week (Mon - Sun)
12
3
4
5
6
7
8
9
3
1. Manual Mode
Switching the Appliance ON:
2.10 To light the appliance press the On/Off (�) button, this will
bring up the LCD screen. Select the 'On' option on the left of
the screen immediately followed directly by the OK button, a
single beep will sound.
After the start up cycle has completed the appliance will light
on the high flame setting (this can take up to 20 seconds).
Select the 'Manual' option on the screen to control the
appliance.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Riva Vision Large MK1 Series Conventional Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Riva Vision Large MK1 Series Conventional Flue in the language / languages: English as an attachment in your email.

The manual is 3.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info