813423
16
Zoom out
Zoom in
Previous page
1/36
Next page
16
Installation Instructions
VERMICULITE/ BLACK REEDED/BLACK GLASS
PANELS
The Riva Vision appliances have the option of three different
liner finishes:
Vermiculite
Black Reeded Panels
Black Glass Linings - see separate instructions for fitting,
NOTE: THE FRONT PANELS ARE IN TWO PIECES:
HOLD THE REAR PANEL UNTIL ALL THE OTHER
PANELS ARE IN PLACE AS THEY CAN FALL FORWARD
3.3 Place the rear panel(s) behind the locating bracket on the
rear support bar, see Diagram 9.
9
Rear Support Bar
Rear Panel
3.4 Place the lower side and front panels in position so the
chamfers meet at the front edge of the burner.
3.5 Ensure the two-piece front panels are engaged against the
centre support tags on the Burner and are pushed together
in the middle, see Diagram 10.
10
Front and Lower Side Panels
3.6 Slide the two side panels up to the rear panel,
see Diagram 11.
11
Side Panels
NOTE: THE HORIZONTAL CHAMFERS MUST ALIGN
ON THE REAR AND SIDE PIECES.
4. Arrangement of the fuel bed
Advice on handling and disposal
of fire ceramics
The fuel effect of the log version of this appliance
is made from Refractory Ceramic Fibre (RCF), a
material which is commonly used for this
application.
Protective clothing is not required when handling
these articles, but we recommend you follow
normal hygiene rules of not smoking, eating or
drinking in the work area and always wash your
hands before eating or drinking.
To ensure that the release of RCF fibres are kept
to a minimum, during installation and servicing a
HEPA filtered vacuum is recommended to remove
any dust accumulated in and around the appliance
before and after working on it. When servicing the
appliance it is recommended that the replaced
items are not broken up, but are sealed within
heavy duty polythene bags and labelled as RCF
waste.
RCF waste is classed as stable, non-reactive
hazardous waste and may be disposed of at a
licensed landfill site.
Excessive exposure to these materials may cause
temporary irritation to eyes, skin and respiratory
tract; wash hands thoroughly after handling the
material.
4.1 White Stone and Glass Fuel Effects: To replace the white
stone effect chippings or glass granules, make sure they are
flattened so they are level with the rim of the tray.
4.2 Vermiculite for Logs Layout: Use the entire bag of
supplied Vermiculite.
TAKE CARE NOT TO SPILL THE EFFECT INTO THE
PILOT AREA.
STACK STONES/GLASS EFFECT IN FRONT OF THE
PILOT SHIELD TO OBSCURE THE BLACK METAL
SHIELD.
ONLY GENUINE GAZCO PARTS CAN BE USED IN THIS
APPLIANCE.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco riva Vision Large Conventional Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco riva Vision Large Conventional Flue in the language / languages: English as an attachment in your email.

The manual is 3.5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info