813419

Gazco Riva VISION LARGE 8000 series Conventional Flue Manual

24
Zoom out
Zoom in
Previous page
1/32
Next page
6.4 Replace in reverse order.
Note: THE HORIZONTAL CHAMFERS MUST ALIGN ON
THE REAR AND SIDE PIECES.
7. MAIN BURNER
7.1 To replace the main burner:
Remove the stone Stone Chippings from the burner
(optional) and undo the screw securing the burner on the
left hand side Diagram 11.
11
AR1965
7.2 Slide the burner fully to the left and lift the right side clear
of the pilot, Diagram 12.
12
AR1868
7.3 Slide the burner to the right and out of its location
7.4 Refit in reverse order
When refilling the Stone Chippings, fill to the rim of the
burner tray and flatten until level.
Ensure no stone Stone Chippings fall into the pilot area.
8. MAIN CONTROL ASSEMBLY
8.1 To access the main control assembly, first remove:
– The decorative Steel frame (if fitted).
– Window frame.
– Enamelled panels .
– Main burner.
– Splitter plate.
8.2 To remove the splitter plater:
Loosen the fixing screws (one each side) and lift off the front
of the plate.
Pull forward and upwards, Diagram 13.
24
13
AR1966
All components can be replaced without removing the
control assembly.
9. PILOT UNIT ASSEMBLY
9.1 Remove the screw retaining the pilot cover, Diagram 14.
14
AR1963
9.2 Cut the cable tie retaining the vida flex sleeve and
disconnect the ignition lead from the electrode.
15
AR0097
13mm
4.0mm
9.3 Undo the pilot pipe and thermocouple and remove the two
fixing screws, retaining the vida flex sleeve which is needed
for the replacement.
9.4 Replace in reverse order and ensure the thermocouple and
ignition lead are threaded through the vida flex and secured
with a cable tie
There is a cut out in the pilot shroud to hold the vida flex.
9.5 Check for gas leaks.
SERVICING INSTRUCTIONS
REPLACING PARTS
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Riva VISION LARGE 8000 series Conventional Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Riva VISION LARGE 8000 series Conventional Flue in the language / languages: English as an attachment in your email.

The manual is 0.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info