813419
6
Zoom out
Zoom in
Previous page
1/32
Next page
6
USER INSTRUCTIONS
2.7 SETTINGTHE°C/24HOUROR°F/12HOURCLOCK
Press OFF and the down arrow until the display changes
from °C/24 hour clock to °F/12 hour clock and vice
versa.
If the remote is removed, lost or damaged, signals
transmitted to the receiver cease. Your fire will go to
standby (pilot) mode after 6 hours.
2B - TOUCH PAD CONTROL
2
AR1885
Press the ON-OFF button to light the appliance, (up to
30 seconds) and use the UP button to increase the flame
height.
Press the DOWN button to decrease the flame height.
At the lowest point it goes to ‘standby mode’, (only pilot
lit).
Press the ON-OFF button to turn the appliance off
2C - EMERGENCY SHUT OFF
If the batteries fail during use of the fire, move the switch to
the OFF (O) position, Diagram 3.
(This switch is set to be ON during normal operation and
must remain ON)
3
AR1933a
The switch is located at the bottom right hand side of the
glass door. The glass front must be removed to gain access.
NOTE: IF THE APPLIANCE IS HOT PROTECTIVE GLOVES
MUST BE USED TO REMOVE THE FRONT.
3. CLEANING THE RIVA VISION
IMPORTANT: THE OUTER PANELLING OF THE RIVA
VISION IS MADE FROM GLASS. USE CAUTION WHEN
INSTALLING, REMOVING AND STORING AS THE
COMPONENTS ARE FRAGILE AND COULD BREAK
UNLESS HANDLED CAREFULLY.
3.1 Make sure the fire and surrounds are cool before cleaning.
Use:
A dry cloth or stainless steel product to clean the
polished plate.
A damp cloth for the painted frame.
A damp cloth to clean the enamelled inner panels.
Use a soft brush to clean the vermiculite panels.
3.2 All Models
Remove the front from the appliance by lifting clear of the
slotted hooks.
4
AR2462
3.3 Using the allen key provided release the two window locks
at the top of the glass door, Diagram 5.
The locks move from shut to open towards the outer edges
of the glass door, Diagram 5.
5
AR1860
Support the frame and let it fall gently forward.
Open it down to its stop position.
When closing the window ensure the window catches are
fully engaged.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Riva VISION LARGE 8000 series Conventional Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Riva VISION LARGE 8000 series Conventional Flue in the language / languages: English as an attachment in your email.

The manual is 0.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info