813418

Gazco RIVA VISION LARGE 8000 series Balanced Flue Manual

7
Zoom out
Zoom in
Previous page
1/36
Next page
7
USER INSTRUCTIONS
4. CHANGING THE RIVA VISION BATTERIES
4.1 The appliance batteries are located behind the touch pad
bracket. This is behind the lower panel, Diagram 6.
To remove the panel lift slightly and pull forward.
6
AR2456
Battery holder rests
behind touchpad
4.2 Unclip the battery holder from the connector and remove
the old batteries.
4.3 Correctly position the four new AA size batteries into the
battery holder. Re-assemble the battery holder as shown in
Diagram 7.
7
AR1920
PLEASE ENSURE NO WIRES ARE TRAPPED BEFORE
REPLACING THE LOWER PANEL. THE TOUCH PAD
LEAD IS EASILY DAMAGED
5. ARRANGEMENT OF FUEL BED
ADVICE ON HANDLING AND DISPOSAL OF FIRE CERAMICS
The fuel effect of the log version in this appliance is made
from Refractory Ceramic Fibre (RCF), a material which is
commonly used for this application.
Protective clothing is not required when handling these
articles, but we recommend you follow normal hygiene
rules of not smoking, eating or drinking in the work area
and always wash your hands before eating or drinking.
To ensure that the release of RCF fibres are kept to a
minimum, during installation and servicing a HEPA filtered
vacuum is recommended to remove any dust accumulated
in and around the appliance before and after working on it.
When servicing the appliance it is recommended that the
replaced items are not broken up, but are sealed within
heavy duty polythene bags and labelled as RCF waste.
RCF waste is classed as stable, non-reactive hazardous waste
and may be disposed of at a licensed landfill site.
Excessive exposure to these materials may cause temporary
irritation to eyes, skin and respiratory tract; wash hands
thoroughly after handling the material.
5.1 Stone Chippings: If you need to replace stone chippings
and refill the tray, make sure the stone chippings are
flattened so they are level with the rim of the tray.
5.2 Vermiculite for Logs Layout: Use the entire bag of supplied
Vermiculite.
TAKE CARE NOT TO SPILL STONE CHIPPINGS OR
VERMICULITE INTO THE PILOT AREA. ONLY STONE
CHIPPINGS OR VERMICULITE SUPPLIED BY GAZCO
CAN BE USED IN THIS FIRE.
6. LOG LAYOUT
LOGS MUST BE POSITIONED ACCORDING TO THE FOLLOWING INSTRUCTIONS TO GIVE THE CORRECT FLAME
EFFECT
6.1 Use all the vermiculite to fill the burner tray and spread evenly across the whole burner
Rest the ceramic bark against the front face of the pilot shield, Diagram 8
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco RIVA VISION LARGE 8000 series Balanced Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco RIVA VISION LARGE 8000 series Balanced Flue in the language / languages: English as an attachment in your email.

The manual is 1.05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info