813420
13
Zoom out
Zoom in
Previous page
1/36
Next page
13
1. Flue and Chimney Requirements
Note: This appliance must only be installed with the flue
supplied.
You must adhere to the following:
1.1 The flue must be sited in accordance with BS5440: Part 1
(latest edition), see Diagram 1.
1.2 Fit a guard to protect people from any terminal less than 2
metres above any access such as level ground, a balcony
or above a flat roof.
1.3 All vertical and horizontal flues must be securely fixed and
fire precautions followed in accordance with local and
national codes of practice.
1.4 A restrictor may be required. Refer to Technical
Specifications on page 11 & 12.
1.5 Two types of flue terminals are available, horizontal and
vertical.
1.6 To measure for a horizontal terminal decide on the terminal
position.
1.7 Measure the height from the top of the appliance to the
centre of the required outlet.
1.8 For minimum and maximum flue dimensions see Diagrams 1A.
1.9 Allow enough room either above or to the side of the
appliance to assemble the flue on top
1.10 Assemble a horizontal flue in the following order:
- Vertical section
- 90° elbow
- Horizontal plus terminal
1.11 Support the opening of a masonry installation with a lintel.
1.12 Only the horizontal terminal section can be reduced in size.
Installation Instructions
Site Requirements
UK Dimensions
1
Dimension Terminal Position Minimum
Distance
A Directly below an opening, air brick, opening windows etc 600mm
B Above an opening, air brick, opening windows etc 300mm
CHorizontally next to an opening, air brick, opening windows etc 400mm
D Below gutters, soil pipes or drain pipe 300mm
E Below eaves 300mm
F Below balcony or car port roof 600mm
G From a vertical drain pipe or soil pipe 300mm
HFrom an internal or external corner 600mm
I Above group roof or balcony level 300mm
J From a surface facing the terminal 600mm
K From a terminal facing the terminal 600mm
L From an opening in the car port (e.g. door, window) into the dwelling 1200mm
M Vertically from a terminal on the same wall 1500mm
NHorizontally from a terminal on the same wall 300mm
O From the wall on which the terminal is mounted N/A
P From a vertical structure on the roof 600mm
Q Above intersection with roof 300mm
* In addition, the terminal should not be nearer than 300mm to an opening in the building fabric formed for the purpose of
accommodating a built-in element such as a window frame.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Riva Vision Large 50000 serie Balanced Flue Instructions at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Riva Vision Large 50000 serie Balanced Flue Instructions in the language / languages: English as an attachment in your email.

The manual is 3.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info