Manual Gazco Riva F67 (page 7 of 40) (English)

813405

Zoom out

Zoom in

1/40

5.3 Remove the ceramic logs and granules, and place them on

a dry, clean surface.

5.4 The logs should not require cleaning. Do not use a vacuum

cleaner or brush to clean the logs, any large pieces of debris

may be removed by hand.

5.5 Ensure any debris is removed from the burner ports.

5.6 Replace the ceramics by referring to Section 6.

5.7 Use a damp cloth to clean the outer casing of the

appliance.

5.8 To clean the glass surface, Gazco recommends you use a

ceramic glass product generally sold for cleaning ceramic

hobs.

6. ARRANGEMENT OF FUEL BED

COMPONENTS

ADVICE ON HANDLING AND DISPOSAL OF FIRE CERAMICS

The fuel effect and side panels in this appliance are made

from Refractory Ceramic Fibre (RCF), a material which is

commonly used for this application.

Protective clothing is not required when handling these

articles, but we recommend you follow normal hygiene

rules of not smoking, eating or drinking in the work area

and always wash your hands before eating or drinking.

To ensure that the release of RCF fibres are kept to a

minimum, during installation and servicing a HEPA filtered

vacuum is recommended to remove any dust accumulated

in and around the appliance before and after working on it.

When servicing the appliance it is recommended that the

replaced items are not broken up, but are sealed within

heavy duty polythene bags and labelled as RCF waste.

RCF waste is classed as stable, non-reactive hazardous waste

and may be disposed of at a licensed landfill site.

Excessive exposure to these materials may cause temporary

irritation to eyes, skin and respiratory tract; wash hands

thoroughly after handling the material.

THE BAG OF GRANULES CONTAINED IN THE LOG SET

IS TO SIMULATE AN ASH EFFECT. THIS IS NOT TO BE

PLACED ON THE BURNER.

6.1 Place some of the granules around the rear and sides of the

burner tray. ENSURE NO GRANULES FALL ON THE

BURNER (see Diagram 7).

AR0749

6.2 Place log 1 (large black log) on the burner. Ensure the rear

of the log touches the rear of the burner (see Diagram 8).

AR0750

CENTRALISE THE LOG BETWEEN THE BURNER PORTS

AT EITHER END.

ALL THE REMAINING LOGS EXCEPT FOR THE SMALLEST

ONE HAVE LOCATION HOLES ON THE UNDERSIDE, THESE

LOCATE ON THE STUDS AT THE FRONT OF THE FIRE.

6.3 Place log 2 on the centre and locate the rear of the log on

the large flat area of log 1 (see Diagram 9).

AR0751

USER INSTRUCTIONS

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Riva F67 in the language / languages: English as an attachment in your email.

The manual is 4.73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gazco Riva F67 Manual

Product: