813407
15
Zoom out
Zoom in
Previous page
1/40
Next page
15
Installation Instructions
Site Requirements
5. Appliance Location
5.1 This appliance has been designed to stand on a hearth,
Bench or Apex stand.
5.2 For practical reasons, the floor should be flat and solid to
allow the appliance to be levelled and secured in place.
5.3 This appliance may be situated anywhere in the room, but
due consideration should be taken to ensure that it is sited
within the constraints of the allowable flue configuration.
5.4 If the appliance is to be sited against a combustible wall, a
clearance of 50mm should be allowed between the wall and
the rear of the appliance.
5.5 This appliance must not be installed in a room that contains
a bath or shower.
Heath Installation
5.6 Unless the appliance is installed on a Bench or Apex stand,
Building Regulations state this appliance must stand on a
non-combustible hearth that is at least 12mm thick.
Gazco recommend the hearth projects the following
distance around the appliance in order to ensure adequate
clearance to combustible materials, see Diagram 1.
CA
B
1
A = 1037 mm
B = 785 mm
C = Minimum 12 mm
Dimension B allows for a rear clearance of 50mm and a
required front projection of 350mm.
Bench & Apex Stand
5.7 Installations on a Bench or Apex stand do not need a
non-combustible floor but the appliance must not be
fitted on a carpet. Use a solid floor.
5.8 The appliance is not suitable for installation against a
combustible wall. A combustible side wall must be a
minimum of 50mm from the appliance.
5.9 This appliance can be installed with an up and out flue
(vertical wall - horizontal flue) or with a vertical flue with roof
termination (see Flue Options, Section 2 Site
Requirements).
Bench Installation
When constructing the flue system take into account the
dimensions of the appliance on the Bench.
5.10 To Install the Bench:
Follow Section 1 Installation - All Models in Installation
Instructions PM205 supplied with the bench kit.
5.11 Securing the appliance:
It will be necessary to drill holes in the Bench and use the
fixings provided.
Once the position of the appliance has been decided:
Follow the instructions for securing the appliance on Page 22.
2
Apex Stand Installation
When constructing the flue system take into account the
dimensions of the appliance on the Apex stand.
5.12 Securing the Apex Stand to the floor:
It will necessary to secure the Apex Stand to the floor, see
Installation Section 5.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Riva 2 F670 Conventional Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Riva 2 F670 Conventional Flue in the language / languages: English as an attachment in your email.

The manual is 4.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info