813407
7
Zoom out
Zoom in
Previous page
1/40
Next page
7
4. Changing the Appliance Batteries
4.1 Remove the decorative front from the appliance, see
Section 3.
4.2 The batteries are located in the control box in the base of
the front of the appliance, see Diagram 3.
Control Box
3
4.3 Slide the cover forward, see Diagram 4.
4
4.4 Remove the old batteries and correctly position the 4 new
high quality (Duracell or similar) AA size batteries into the
battery compartment.
4.5 Re-assemble in reverse.
5. Cleaning the Appliance
5.1 Make sure the appliance and surrounds are cool before
cleaning.
Use a damp cloth for the outer casing of the appliance and
the decorative front.
5.2 Remove the decorative front from the appliance, see
Section 3.
5.3 Remove the glass frame by unscrewing the 6 screws, see
Diagram 5.
5
5.4 Remove the liners and logs, and place them on a dry, clean
surface.
5.5 The logs should not require cleaning. Do not use a vacuum
cleaner or brush to clean the logs, any large pieces of
debris may be removed by hand.
5.6 Ensure any debris is removed from the burner ports.
5.7 The liners can be removed by referring to Section 6.
5.8 Replace all internal components when finished.
NOTE: ENSURE THAT THE LOGS ARE POSITIONED
CORRECTLY, SEE SECTION 7. ONLY USE THE CORRECT
AMOUNT OF LOGS AS SPECIFIED IN THE DIAGRAMS.
5.9 The glass frame must be refitted to the appliance following
cleaning or servicing.
5.10 Ensure that the rope seal on the back of the glass frame is
intact then hook the location tabs over the hooks on top of
the firebox. Replace the 6 screws working from the top
down. Tighten the screws evenly DO NOT OVER
TIGHTEN, see Diagram 4.
NEVER OPERATE THE APPLIANCE WHEN THE GLASS
FRAME IS REMOVED OR BROKEN.
5.11 Replace ALL of the securing screws ensuring that a screw is
present in all fixing slots.
UNDER NO CIRCUMSTANCES SHOULD THE
APPLIANCE BE USED IF ANY OF THE GLASS
FRAME RETAINING SCREWS ARE LOOSE OR
MISSING.
User Instructions
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Riva 2 F670 Conventional Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Riva 2 F670 Conventional Flue in the language / languages: English as an attachment in your email.

The manual is 4.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info