Manual Gazco Loft Conventional Flue (page 5 of 52) (English)

813398

Zoom out

Zoom in

1/52

ADVANCED CONTROLS

There are 3 different modes available for controlling and operating

the appliance:

1. Manual Mode

2. Temp Mode (Automatic)

3. Timer Mode (Automatic)

In MANUAL MODE you can:

— turn on the main burner using the UP button

— regulate the flame from high to low and back

— turn off the burner leaving just the pilot burning

In TEMP MODE (Automatic) you can:

— set the room temperature so the thermostat in the remote

automatically maintains that temperature

In TIMER MODE (Automatic) the appliance:

— turns on and off according to the set time periods

— automatically regulates the room temperature during the

set periods

NOTE: When operating the appliance in Temp or

Timer mode, the pilot remains lit and the appliance

then automatically switches on at programmed times

to bring the room to the set temperature whether or

not you are in the room.

NEVER LEAVE ANY COMBUSTIBLE MATERIALS

WITHIN 1 METRE OF THE FRONT OF THE

APPLIANCE.

SWITCHING BETWEEN MODES

Press the SET button to change to Temperature Mode.

Press again to change to Timer Mode.

Keep pressing to run through all operating modes. These

are:

— MAN

— DAY TEMP

— NIGHT TEMP

— TIMER

and back to MAN

NOTE: MAN mode can also be reached by pressing either the

UP or DOWN button.

MANUAL MODE

Press the OFF button and the UP button simultaneously. You hear

several clicks and audible beeps as the appliance begins the

ignition process, (up to 30 seconds).

Turning the appliance Off:

Press the OFF button to turn the appliance off.

FOR SAFETY, YOU MUST WAIT 30 SECONDS BEFORE

LIGHTING THE APPLIANCE AGAIN.

Increasing the Flame Height:

Press the UP button once to increase flame height one stage.

Press and hold the UP button to increase to maximum.

Decreasing the Flame Height:

Press the DOWN button once to decrease flame height one

stage. Press and hold the DOWN button to decrease to minimum.

At the lowest point the appliance goes to 'Standby Mode' (Only

Pilot lit).

NOTE: While pressing a button a symbol indicating

transmission appears on the display. The receiver

confirms transmission with a sound signal.

TEMP MODE (AUTOMATIC)

The display shows the current room temperature.

To increase or decrease the appliance’s output:

Press the SET button to select either the DAY TEMP or the NIGHT

TEMP mode by briefly pressing the SET button.

Hold the SET button until the TEMP display flashes and then let

go.

Set the desired temperature with the UP and DOWN arrows.

(Minimum temperature 5C, maximum 40C or 40F to 99F when

Fahrenheit is the preferred option)

Press the OFF button to stop the display flashing or wait to return

to TEMP mode.

NOTE: If you set a temperature that is beneath the

current room temperature, the appliance

automatically switches to PILOT (Stand by).

If you would like the Night temperature control to turn

off then decrease the temperature until [--] is

displayed.

TIMER MODE (AUTOMATIC)

There are two programmable settings you can make over a 24

hour period, P1 and P2. These are normally used to provide an

early morning and evening setting for each working week:

P1 + = Start Timed Setting 1

P1 + = End of Timed Setting 1

P2 + = Start Timed Setting 2

P2 + = End of Timed Setting 2

P1 - Program 1 for a Timed Setting

Press the SET button until the TIMER mode is displayed.

Hold the SET button. The displays flashes the current time for P1.

While the time displayed is flashing you can alter the hours

and minutes set.

To set the time your appliance first lights, change P1

— Press the UP button to alter the hour.

— Press the DOWN button to alter the minutes in 10 minute

increments.

Press SET again to move to the end setting for P1 This is the

time your appliance first shuts down:

— Press the UP button to alter the hour.

— Press the DOWN button to alter the minutes.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Loft Conventional Flue in the language / languages: English as an attachment in your email.

The manual is 8.98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gazco Loft Conventional Flue Manual

Product: