813463

Gazco Huntingdon Manual

5
Zoom out
Zoom in
Previous page
1/80
Next page
5
OPERATING THE APPLIANCE
- ADVANCED OPERATION
Display
Mode
Heating/ Advance
Fuel Bed
Power
Flame
Timer in Normal
Mode
Temperature Sensor
Convection
Heating Period
Battery Power
Actual Room
Temperature
Timer Mode
Advance
Temperature
Setting
Time and Day
Comfort
Setting
TURN ON/OFF
Press button to turn on the flame effect.
Press button to turn off all the functions under the normal
heating control mode.
Press button to turn off the flame effect under daily and week
timer heating mode.
WEEK DAYS/ TIME/ COMFORT TEMPERATURE AND UNIT
SETTING
Ensure the clock is set to the correct time.
Press for 3 seconds.
Press the ‘’ or ‘’ button to choose setting.
The selected character will be highlighted.
Press the ‘+’ or ‘-’ button to adjust the number.
Time: 24-hour system.
Select Comfort temperature from 15-25℃.
Temperature unit: ℃/℉.
Press the button for 3 seconds or wait 10 seconds to save and
exit the week, time and heating temperature setting.
DAILY TIMER HEATING
The following heating periods have been preset, but can be altered
if desired:
06:00 until 08:00
17:00 until 22:00
Press until shows at the upper right corner of the screen.
Hold the button for 6 seconds.
3 timed heating periods can be set per day.
Press ‘’ or ‘’ to choose hour or minute.
Press ‘+’ or ‘-’ to set the number.
The minute increment / decrement by 15min per press.
Hold the button for 3 seconds or wait for 10 seconds to save
and exit the heating time period setting.
Press to check the daily timer mode.
To turn heating off, return to Normal Control Mode.
When in Daily Timer Mode switching the appliance off with the
remote will stop the light output. The heat output will continue
according to the timer settings.
ADJUSTING THE SET TEMPERATURE
Press the ‘+’ or ‘-’ button to increase or decrease the temperature
on the basis of COMF temperature.
COMF means the actual temperature is the same as setting.
ECO means the actual temperature is 2℃ lower than the setting
temperature.
ECO- means 4℃ lower.
COMF+ means 2℃ higher.
COMF++ means 4℃ higher.
ADAPTIVE START CONTROL
The heater will automatically determine the appropriate time to
heat to ensure that it will reach the set-pointed temperature at the
set time (up to 45 minutes prior to the set time).
GB
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Huntingdon at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Huntingdon in the language / languages: English, German, Dutch, French, Italian, Spanish, Norwegian as an attachment in your email.

The manual is 7.77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info