813484
6
Zoom out
Zoom in
Previous page
1/48
Next page
6
CLEANING THE APPLIANCE
WARNING: NEVER CLEAN THE APPLIANCE
WHILE IT’S HOT. THE APPLIANCE STAYS HOT
FOR A LONG TIME AFTER SHUTDOWN.
IMPORTANT: THE OUTER PANELLING OF THE
APPLIANCE IS MADE FROM CAST IRON. USE
CAUTION WHEN INSTALLING, REMOVING AND
STORING AS THE COMPONENTS ARE HEAVY
AND SHOULD BE HANDLED CAREFULLY.
Make sure the appliance and surrounds are cool before cleaning.
REMOVING THE DOOR
For rear flue exit lift the top of the appliance off and put to one
side.
For top flue exit lift and support the top to give clearance.
HUNTINGDON 20 AND 40
Supporting the door top and bottom pull forwards whilst lifting the
front upwards at a 45° angle until it is clear of the slots and pull
away from the appliance.
HUNTINGDON 30
Lift the front upwards until it is clear of the slots and pull away from
the appliance.
ALL MODELS
Remove the glass frame by undoing the fixing screws and lifting
clear. Take care to support the glass window panel when
removing the screws.
Place carefully to one side.
Lift out the log guard.
Carefully remove the ceramic fuel bed components and set aside.
Protect the floor coverings and follow the advice given.
The logs do not require cleaning. Do not use a vacuum cleaner or
brush to clean the logs, any large pieces of debris can be removed
by hand.
Ensure any debris is removed from the burner ports.
Replace the ceramics see Log Layout section.
Ensure that the fibreglass seal on the back of the glass frame is
intact and replace the screws working from the top down. Tighten
the screws evenly DO NOT OVER TIGHTEN.
NEVER OPERATE THE APPLIANCE WHEN THE GLASS
FRAME IS REMOVED OR BROKEN.
Replace ALL of the securing screws ensuring that a screw is
present in all fixing slots.
UNDER NO CIRCUMSTANCES SHOULD THE
APPLIANCE BE USED IF ANY OF THE GLASS
FRAME RETAINING SCREWS ARE LOOSE OR
MISSING.
Use a damp cloth to clean the outer casing of the appliance.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Huntingdon 20-30-40 - Conventional Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Huntingdon 20-30-40 - Conventional Flue in the language / languages: English as an attachment in your email.

The manual is 13.82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info