813483
36
Zoom out
Zoom in
Previous page
1/52
Next page
36
Servicing Instructions - Replacing Parts
All Models
3. Window Frame Assembly
3.1 Remove the glass frame by undoing the fixing screws and
lifting clear, see Diagram 5. Take care to support the glass
window panel when removing the screws.
5
3.2 Place carefully to one side.
3.3 Lift out the log guard and carefully remove the ceramic fuel
bed components.
3.4 Refit in reverse order.
3.5 Ensure that the rope seal on the back of the glass frame is
intact and replace the screws working from the top down.
Tighten the screws evenly DO NOT OVER TIGHTEN, see
Diagram 3.
NEVER OPERATE THE APPLIANCE WHEN THE GLASS
FRAME IS REMOVED OR BROKEN.
3.6 Replace ALL of the securing screws ensuring that a screw is
present in all fixing slots.
UNDER NO CIRCUMSTANCES SHOULD THE
APPLIANCE BE USED IF ANY OF THE GLASS
FRAME RETAINING SCREWS ARE LOOSE OR
MISSING.
4. Baffle & Ceramic Liners
4.1 To access the burner tray and interior workings of the
appliance it may be necessary to remove the baffle and the
liners.
4a. Liners
(Huntingdon 20 only)
BAFFLE
4.2 There is no requirement to remove the baffle for servicing.
4.3 The burner can be accessed without the need to remove the
side liner panels. If they need to be taken out then first
remove the screws securing the two brackets on either side
of the firebox.
The panels will now slide forward, see Diagram 6.
6
LINERS
4.4 Gently lift the upper rear liner and pull forwards.
With the panel raised it should be possible to remove from
the liner brackets, see Diagram 7.
Note: It may be necessary to use a flat object like a
screwdriver to separate the two panels.
7
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Huntingdon 20-30-40 - Balanced Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Huntingdon 20-30-40 - Balanced Flue in the language / languages: English as an attachment in your email.

The manual is 3.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info