813483
17
Zoom out
Zoom in
Previous page
1/52
Next page
17
3. Rear Flue
2
Terminal dimensions:
395 x 200 x 200 mm (H x W x D)
Guard supplied
Cut to length as required on site (see Diagram 2).
4. Top Exit Flues
- Huntingdon 30 & 40 only
There are two types of flue terminal: horizontal and vertical.
For vertical see Section 4D.
4a. For horizontal terminal installations
4.1 Decide on the terminal position.
4.2 Measure the height from the top of the appliance to the
centre of the required hole. For minimum and maximum
dimensions see Diagram 3.
4.3 To fit the flue you must have access to the top or the side of
the appliance to connect the flue.
4.4 Assemble the vertical sections making sure the top plate
and flue collar are fitted before the fluepipe.
4.5 Add the 90° elbow.
4.6 Add the horizontal section and terminal. Only the
horizontal part can be reduced in size.
4.7 A masonry installation requires the addition of a suitable
lintel to support the opening. Refer to Installation
Instructions, Technical Information for details of the flue
length.
Installation Instructions
Site Requirements
4b. Top Flue Up and Out Kit
4.8 This flue rises vertically from the top of the appliance, then
continues horizontally outward, see Diagram 3a or 3b.
The basic kit comprises:
Huntingdon 30 8523/8523AN
1 x 500mm vertical length
1 x 500mm terminal length
1 x 90 degree elbow
1 x wall plate
1 x 75mm restrictor
4 x fixing screw
1 x 52mm restrictor
1 x 60mm restrictor
Huntingdon 40 8509/8509AN
1 x 500mm vertical length
1 x 200mm vertical length
1 x 500mm terminal length
1 x 90 degree elbow
1 x wall plate
1 x 60mm/70mm/75mm restrictor
4 x fixing screws
3a Huntingdon 30
3b Huntingdon 40
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Huntingdon 20-30-40 - Balanced Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Huntingdon 20-30-40 - Balanced Flue in the language / languages: English as an attachment in your email.

The manual is 3.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info