813483
7
Zoom out
Zoom in
Previous page
1/52
Next page
7
5.15 With the top still supported or removed refit front by locating
in grooves and lowering into place, see Diagrams 3
(Huntingdon 20 & 40) or 4 (Huntingdon 30).
5.16 Replace top, see Diagram 2.
NEVER OPERATE THE APPLIANCE WHEN THE GLASS
FRAME IS REMOVED, OR THE GLASS IS BROKEN.
5.17 Use a damp cloth to clean the outer casing of the appliance.
6. Cleaning Ivory Painted Appliances
6.1 Allow the appliance to cool thoroughly to avoid risk of
burns.
6.2 Ivory painted appliances require special attention when
cleaning. They have been coated with a high quality paint
that should give many years of service. However, this colour
will mark more easily and require cleaning more than other
models.
6.3 Take care when touching the appliance to avoid marking the
paint. Most marks can be removed using a mild soap
solution and a clean lint free cloth. The finish can also be
refreshed using aerosol touch up paint (product code 2055)
available from your Gazco retailer.
7. Arrangement of Fuel Bed
Advice on handling and disposal
of fire ceramics
The fuel effect in this appliance are made from
Refractory Ceramic Fibre (RCF), a material which
is commonly used for this application.
Protective clothing is not required when
handling these articles, but we recommend you
follow normal hygiene rules of not smoking,
eating or drinking in the work area and always
wash your hands before eating or drinking.
To ensure that the release of RCF fibres are kept
to a minimum, during installation and servicing a
HEPA filtered vacuum is recommended to
remove any dust accumulated in and around the
appliance before and after working on it. When
servicing the appliance it is recommended that
the replaced items are not broken up, but are
sealed within heavy duty polythene bags and
labelled as RCF waste.
RCF waste is classed as stable, non-reactive
hazardous waste and may be disposed of at a
licensed landfill site.
Excessive exposure to these materials may
cause temporary irritation to eyes, skin and
respiratory tract; wash hands thoroughly after
handling the material.
8. Log Layout
LOGS MUST BE POSITIONED ACCORDING TO THE
FOLLOWING INSTRUCTIONS TO GIVE THE CORRECT
FLAME EFFECT
Huntingdon 20 layout
All logs can be identified by a letter (A - E) on their
underside. Logs B and E also have holes to locate each
onto a burner stud.
8.1 Ensure the burner tray is clean and free from any debris,
see Diagram 6.
6
8.2 Place Log A on the higher rear bracket and push up against
the back panel, see Diagram 7.
7
8.3 Place Log B over the two middle studs on the burner tray,
see Diagram 8.
8
User Instructions
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Huntingdon 20-30-40 - Balanced Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Huntingdon 20-30-40 - Balanced Flue in the language / languages: English as an attachment in your email.

The manual is 3.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info