Manual Gazco F40 Avanti Balanced Log (page 11 of 32) (English)

813395

Zoom out

Zoom in

1/32

INSTALLATION INSTRUCTIONS

SITE REQUIREMENTS

1. FLUE AND CHIMNEY REQUIREMENTS

Note: This stove must be installed in conjunction with the flue

supplied.

1.1 The flue must be sited in accordance with BS5440:Part1

(latest edition) (see Diagram 1).

1.2 A guard must be fitted where the flue terminal exits at less

than 2 metres above any level ground, balcony or flat roof

to which people have access.

1.3 All vertical and horizontal flues must be securely fixed and

conform to local and national codes of practice for stove

precautions.

1.4 A restrictor may be required. Refer to the Technical

Specifications on the previous page.

2. TIMBER FRAMED BUILDINGS

2.1 To prevent a stove hazard, you must provide additional

clearance when the stove passes through a wall containing

any combustible materials.

2.2 A steel sleeve must be inserted into the hole through which

the flue passes to give an air gap of 25mm between the

sleeve and the outside surface of the flue.

2.3 Contact your local buildings authority for further guidance

on installing gas stoves in timber framed buildings.

Note: Make sure you provide adequate clearance at the sides

and back of the stove for servicing access.

AR0602

UK Dimensions

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gazco F40 Avanti Balanced Log in the language / languages: English as an attachment in your email.

The manual is 3.87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gazco F40 Avanti Balanced Log Manual

Product: