813472

Gazco Clarendon - Conventional Flue Manual

28
Zoom out
Zoom in
Previous page
1/32
Next page
28
Servicing Instructions - Replacing Parts
5. Ignition Lead
5.1 To access the back of the pilot assembly, see Section 3.
5.2 Disconnect the ignition lead from the electrode.
5.3 Remove the front cover from the control valve by removing
the retaining screw, see Diagram 9 and gently levering clear
with flat bladed screwdriver, see Diagram 10.
NOTE: There is a small cylindrical metal spacer inside
the cover, this must be kept and replaced on the fixing
screw on re-assembly.
9
10
5.4 Disconnect the end of the ignition lead from the valve body,
see Diagram 11, Arrow B, note the existing route of the
ignition lead.
B
11
5.5 Replace with a new ignition lead following the same route
as the old one.
5.6 Replace the valve cover and the pilot assembly.
5.7 Check operation of the new ignition lead.
6. Piezo
6.1 The piezo assembly used on this appliance is not
serviceable and is not likely to fail.
6.2 If a new piezo is required it will be necessary to change the
valve, see Section 7.
7. Gas Valve
7.1 Turn the gas supply off at the isolation device.
7.2 Disconnect the 2 x 8mm and 1 x 4mm gas pipe fittings at
the back of the gas valve.
7.3 Disconnect the thermocouple, see Diagram 12, Arrow A.
C
A
C
12
7.4 Remove the control valve cover and disconnect the ignition
lead from the gas valve, see Section 5.
7.5 Undo the 2 bolts securing the gas valve to the appliance
and remove the valve, see Diagram 12, Arrow C.
7.6 Replace in reverse order.
7.7 Check all joints for gas leaks and check operation of the
thermocouple and ignition lead.
8. Magnetic Safety Valve
8.1 Turn the gas supply off at the isolation device.
8.2 Undo the thermocouple connection from the back of the gas
valve.
8.3 Undo the magnetic valve retaining nut at the back of the
control valve, see Diagram 12, Arrow A.
8.4 Gently tap out the magnetic valve and replace with a new
unit.
8.5 Replace the retaining nut and tighten.
8.6 Secure the thermocouple in the rear of the gas control. (Do
not over tighten).
8.7 Turn the gas supply on and check the entire pipe work and
valve joints for any leaks.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Clarendon - Conventional Flue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Clarendon - Conventional Flue in the language / languages: English as an attachment in your email.

The manual is 2.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info