813476
22
Zoom out
Zoom in
Previous page
1/28
Next page
22
AAR0943
2
2.9 Loosen main injector nut on airbox and disconnect from
injector (see Diagram 3, arrow A).
AR0389
A
3
2.10 Remove the 2 screws attaching burner to back of unit (see
Diagrams 4A & 4B). Carefully withdraw burner unit
upwards and tilt to remove the burner through door
opening. Remove the 2 x screws holding the heat shield in
place.
AR0384
4A
1. GENERAL
IMPORTANT: ALWAYS WEAR THE GLOVES PROVIDED
WHEN HANDLING AN IVORY PAINTED APPLIANCE.
1.1 All principal components can be replaced without removing
the appliance from its installation but it is essential that the
gas supply to the appliance is turned off at the isolation
device before proceeding further.
2. BURNER UNIT REMOVAL
2.1 Turn the gas supply off at the isolation device. Ensure the
unit is cool.
2.2 Use cover material to front of appliance to protect
paintwork etc.
2.3 Remove the door and place to one side. (4 nuts).
2.4 Carefully remove the ceramic fuel components to a safe
place.
2.5 Remove front cover-plate (2 x screws).
2.6 Remove cover plate fixing bracket (2 x wing nuts) (small
stoves only).
2.7 Unscrew pilot union nut on gas valve (see Diagram 1).
AR0391
1
2.8 Disconnect thermocouple from gas valve (see Diagram 2).
Remove ignition lead from electrode (cut cable tie to
ignition lead if required).
SERVICING INSTRUCTIONS
REPLACING PARTS
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Clarendon - coal at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Clarendon - coal in the language / languages: English as an attachment in your email.

The manual is 3.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info