813476

Gazco Clarendon - coal Manual

6
Zoom out
Zoom in
Previous page
1/28
Next page
6
USER INSTRUCTIONS
6.1 Remove the door by undoing the four dome nuts using the
tool supplied and place to one side.
6.2 Carefully remove the ceramic fuel bed components and
place to one side taking care to protect floor coverings etc,
PLEASE HANDLE WITH CARE.
6.3 The coals should not require cleaning. Do not use a vacuum
cleaner or brush to clean the coals, any large pieces of
debris can be removed by hand.
6.4 Ensure any debris is removed from the burner ports.
6.5 Replace the ceramics by referring to section 6.
6.6 Use a damp cloth to clean the outer casing of the
appliance.
7. CLEANING IVORY PAINTED APPLIANCES
7.1 Allow the appliance to cool thoroughly to avoid risk of
burns.
7.2 Ivory painted appliances require special attention when
cleaning. They have been coated with a high quality paint
that should give many years of service. However, this colour
will mark more easily and require cleaning more than other
models.
7.3 Take care when touching the appliance to avoid marking
the paint. Most marks can be removed using a mild soap
solution and a clean lint free cloth. The finish can also be
refreshed using aerosol touch up paint (product code 2055)
available from your Gazco retailer.
8. FUEL BED ARRANGEMENT
The major ceramic components can be found inside the
firebox. Remove the cast iron door using the tool provided,
and remove all the protective packaging from these
components. See Diagram 3.
AR0540
3
NOTE: THE CAST IRON IS HEAVY, TAKE EXTREME CARE
WHEN HANDLING.
The loose coals should be arranged as specified in the
following steps. Care should be taken to ensure that there is
sufficient space between the coals to allow flames to pass
through.
Small Clarendon
8.1 Place the flame baffle onto the burner and push up against
the rear tray lip (see Diagram 4).
AR0359
4
8.2 Locate the rear panel against the spacer brackets and slide
down so that it locates on the ledge of the flame baffle (see
Diagram 5).
AR0360
5
8.3 Locate the front coal between the heat shield and flame
baffle so that its ends sit flat against the burner skin (see
Diagram 6).
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Clarendon - coal at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Clarendon - coal in the language / languages: English as an attachment in your email.

The manual is 3.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info