813459
6
Zoom out
Zoom in
Previous page
1/72
Next page
6
GB
ADAPTIVE START CONTROL
The heater will automatically determine the appropriate time to heat
to ensure that it will reach the set-pointed temperature at the set
time (up to 45 minutes prior to the set time).
FLAME COLOUR ADJUSTMENT
Press button.
There are 3 flame colour options.
There are 6 levels of brightness, including off.
Brightness
Level
Colour
Option
Press the or button to cycle through the flame colour
options.
Press the ‘+’ button to increase the flame brightness.
Press the ‘-’ button to decrease the flame brightness until off.
FUEL BED COLOUR ADJUSTMENT
Press to enter the fuel bed light adjustment screen.
There are 14 fuel bed colour options.
There are 6 levels of brightness, including off.
Brightness
Level
Colour
Option
Press the or button to cycle through the fuel bed colour
options.
Press the ‘+’ button to increase the fuel bed brightness.
Press the ‘-’ button to decrease the fuel bed brightness until off.
NORMAL CONTROL MODE
Normal Control Mode is the default setting.
Press button until the logo is shown
Press the ‘+’ or ‘-’ button to adjust the setting temperature from
17℃ to 25℃.
Press button to turn the heat on/off..
Note: It is normal for the fan heater to stop running for periods
of time. This happens if the room temperature is higher than the
temperature set on the control.
The heater indicator will be turned off after 10s if the flame is
switched ON. The heater indicator will stay ON if only the heating
function is used.
When in Normal Control Mode switching the appliance off with
the remote will stop both the light and heat output.
COUNT DOWN TIMER
This setting is only in normal heating control mode. It allows the
appliance to be returned to Standby after a set period of time. The
heater must be switched on to use this function.
Press to cycle through the setting from Off and 0.5 hours to 9
hours. Timer logo and remaining time will show on the screen.
The heater of appliance can be automatically run by using daily
timer and weekly timer.
WEEK TIMER HEATING
The following heating periods have been preset, these can be
altered if desired:
From Monday to Friday
06:00 until 08:30
17:00 until 22:00
From Saturday to Sunday
06:30 until 09:30
11:00 until 13:00
17:00 until 22:00
Press until shows.
Hold the button for 6 seconds.
Press ‘’ or to move the cursor (a flashing underline).
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gazco Chesterfield at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gazco Chesterfield in the language / languages: English as an attachment in your email.

The manual is 5.49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info